You’ll need to use plastic wall anchors to provide proper support if you’re installing in drywall. Fasten the brackets to the walls using your drill or screwdriver. … Hang the curtains and double-check to make sure your brackets are still secure. Open and close to check that they’re functioning properly before finishing.
Can I hang curtain rods without anchors?
If you find the studs that are on each side of a window , you can screw right into the studs without the drywall anchors. If your walls are concrete block, you will need the screw anchors. If you are installing curtain rods into wood then generally no anchor would be required.
Do I have to use anchors?
“Because drywall is too weak to hang things from, a drywall anchor is necessary,” explains Matt Michaels, a spokesman for Lowe’s Home Improvement in Charlotte, NC. The anchor essentially allows you to insert screws into the wall without causing the soft drywall to crumble around it.
Do and don'ts of hanging curtains?
- DO: Hang Curtains to the Floor. Curtains look sophisticated and elegant when they hang all the way to the floor. …
- DON’T: Stop at the Windowsill. …
- DO: Invest in Good Hardware. …
- DON’T: Forget to Measure. …
- DO: Have Fun With Layering. …
- DON’T: Skimp On Fabric.
How do you hang a curtain rod without drilling holes?
- Use 3M Command Hooks.
- Try Kwik-Hang Curtain Rod Brackets.
- Use Tension Rods.
- Get Creative With Coat Hooks.
- Try Magnetic Rods on Metal Doors.
How do professionals hang curtains?
- Hang them high. Especially in rooms with low ceilings, be sure to hang your curtain rod as high as possible. …
- Hang them wide. …
- Hang them in the right length. …
- Hang the right amount of panels. …
- Hang the right style of panel.
Can you hang curtains without drywall anchors?
Knowing which to use is very important — without a drywall anchor, a screw alone will not hold the weight of the curtain and rod. And if you try and use a drywall anchor in a stud, you’re just in for a world of frustration. … Two of our three brackets went into studs. If you have dry wall, you’ll have to use an anchor.
Can you hang curtains with Command hooks?
Be sure to wait the required hour to allow the adhesive to bond before hanging your curtains. You can see how wonderful hanging curtains with command hooks worked out! We lived in this home for two years and the command hooks held the curtains the entire time with no issue!
What screws to hang curtains?
Insert a No. 8 plastic screw anchor into each hole. Each one should fit snugly enough to require a hammer to tap it flush to the wall. Replace the bracket and drive a 1 1/4-inch wood screw into each anchor with a screwdriver.
Should curtains cover the whole wall?
The drapes should cover as much of the wall as possible to create the illusion of space, so aim to position the rod a few inches from the ceiling. … We used cream linen drapes, which were a similar color to the walls, to create a cohesive look.
Article first time published on
How do you hang curtains on a weak wall?
- Step 1: Mark the Spot for the Bracket. …
- Step 2: Drill Top Hole. …
- Step 3: Add Screw. …
- Step 3: Insert a Molly Bolt Into the Hole. …
- Step 3.5: Add Screw. …
- Step 4: Dry Fit Bracket and Mark Second Hole Hole. …
- Step 5: Drill Second Hole and Add Screw. …
- Step 6: Repeat for Other Brackets.
Are curtains supposed to drag?
Interior designers note the bottom of your curtains should fall to the floor, and you can even let them “puddle” a bit. However, if you don’t want your curtains to drag on the floor when you open and close them, let them stop about an inch from the floor, but no more.
Is it OK for curtains to touch the floor?
Yes, curtains should be long enough to touch the floor. With a few exceptions, the longer the curtains are the more stylish and elegant it will look. This is why most standard ready-made curtains are lengthy. But the reality is that various decorating styles use different curtain lengths.
How many inches of curtain should touch the floor?
You should aim for your curtain hem to be about 3/8″ to 1/2″ above the floor. Not only is this an easier length to measure for, but it also makes it simple to vacuum and sweep. It’s a great option if you plan to open and close your curtains a lot since you won’t need to rearrange them each time.
What happens if you don't use wall anchors?
The threads of a screw into only drywall, without an anchor, will NOT permanently hold in the drywall. It will just pull right back out sooner or later. Even though it may screw into the drywall and “feel” tight, when you hang a picture on it, it will pull out almost immediately. Especially if the picture is heavy.
When should I use wall anchors?
When to Use Wall Anchors The weight of what you’re hanging is the primary consideration when it comes to mounting on drywall. Drywall anchors for heavy items are rated to hold a specified amount of weight. Never exceed the drywall anchor’s weight limit.
What is the purpose of screw anchors?
Screw anchors are inserts, typically made from plastic, metal, or fiber, which enable the attachment of screws into brittle materials — such as masonry or dry wall.
Can you hang curtain rod with command strips?
Look no further than 3M Command hooks. Yes, the same hooks you use for hanging pictures, keys, mugs, and plants. An easy hack turns them into quick DIY supports for your curtain rod and that splash of color, sun shade, or bit of privacy you’ve been searching for.
How do you hang patio curtains without drilling?
If you want to hang outdoor curtains without drilling holes, tension rods are the way to go. This method is especially helpful for patios with columns made of stone or brick. You can also use ceiling-mounted hardware for brick or stone patio walls.
Will no more nails hold up a curtain rail?
DA. No More Nails is not bad but there is no glue in the world that will stick up curtain poles because the substrate will give even if the glue doesn’t.
Can you hang curtains in drywall?
Hanging curtains on drywall is not as simple as it looks. Drywall will not hold a screw because it’s not solid. If you mount a curtain rod with a screw, over time you will end up with a sagging curtain and hole. Using drywall anchors is the only solution.
Should you hang curtains to the ceiling?
Hanging your curtains at ceiling level maximizes the light that shines through your window and it makes the room feel larger because the walls look taller. This works well in a small space, but may not be ideal in a room that is already too large.
Where do you put the brackets for curtains?
Each bracket should be placed at the height you previously determined and about four to six inches from the side of the window frame. (This will allow you to open the curtains completely.) Check to make sure your pencil marks are level otherwise the entire window treatment will be crooked.
How much weight can a command hook hold?
The large strips can handle a 24-inch to 36-inch object that weighs up to 16 pounds. The smaller hanging strips can only handle up to 4 pounds.
Do curtain rods need studs?
Well, you do NOT need a stud to hang a curtain rod, but you will need a special type of wall anchor to hold the weight. There are two different types I like to use: a drywall anchor or toggle bolts. … TIP: If you could have a stud in your wall, use a 1/8″ drill bit to check first. You will know if there is wood!
Which side of the curtain faces out?
The right side of the lining orients to the window, so you need to know how to determine the right and wrong side before you start your construction. The right side of the lining faces out the window.
Which side of curtains should be inside on door?
But the fabric side (also described as the woven or rough side) is made to face the window because of the durability. Face the fabric side out to avoid yellowing or sun damage, which will preserve the lifespan of your curtains.
Should curtains be the same in every room?
Consistency is key in good interior design, and mixing and matching different styles of drapery in one room shouldn’t be done without good reason. “Generally, if all the windows are the same size,” Jacobson advises, “I would recommend the same style window treatment throughout.”
How do you hang heavy curtains on drywall?
Use longer screws or nails The best way to do this is to install the brackets with longer screws or longer nails. The extra length helps distribute the weight of the curtains further into the plasterboard, making it the joint sturdier than the screws used in traditional window installation.
How do I keep my curtain rod from sagging in the middle?
- Realign the Support Brackets. …
- Provide Extra Support Brackets. …
- Insert Another Support Rod. …
- Change Your Fabric Material. …
- Reduce the Cotton’s Length. …
- Use a Barrier to Protect Your Curtain. …
- Get a More Durable Curtain Rod. …
- Replace Your Support Brackets.
What anchors for plaster walls?
Plastic wall anchors, Molly Bolts or Toggle Bolts? Plastic wall anchors don’t work with lath and plaster walls. Instead, use plaster anchors made of metal like a molly bolt or a toggle bolt. Be sure to use one that’s long enough to get behind the plaster and lath.
