A saniflo or macerator toilet relies on electricity to power the macerator and pump the waste out of the toilet. In the event of a blackout (or you fail to pay your electricity bills), you will not be able to use the saniflo.
How do you hook up a macerator pump?
- Attach the Bowl. First, connect the accordion seal to the bowl of the macerating system then anchor the bowl to the floor using the anchoring holes.
- Attach the Unit to the Sewer Line. …
- Run a Vent Line. …
- Run the Cold Water Line to the Toilet.
Why is my Saniflo not working?
If your Saniflo won’t turn off, the likely cause is a blockage in the system. There may be a blockage in the macerator, pump or the waste outlet pipe. Alternatively, there may be a fault with the return valve or damage to the unit’s rubber membrane. Occasionally, this is caused by the microswitch misfiring.
How do you vent a Saniflo toilet?
All of Saniflo products require an 1-1/2 inch vent pipe, which must be vented to the main vent stack as per plumbing codes. The Sanicompact 48 and Sanistar models do not require a vent connection since they are considered self contained units.
Can any toilet connect to a macerator?
Macerator pumps can be installed behind the toilet pan or in a different location as needed. They can be used with both close-coupled and wall-hung toilets.
Where does the waste go on a saniflo?
Where does the Saniflo waste go? When flushed, the waste in a Saniflo toilet does not go directly to the outlet pipe. Instead, it heads to the WasteAway (soil stack) unit. Before it arrives there the Saniflo macerator technology reduces the waste to liquid form within a few seconds.
What do I need to install a Saniflo toilet?
- A Saniflo upflush toilet pump system of your choice.
- An available water supply.
- A discharge pipe of a size ranging from ¾” to 1”
- A source of electricity, preferably with a GFI breaker.
- A venting source.
Do Saniflows need servicing?
What maintenance does the Saniflo macerator require? The macerator does not require any special maintenance; however, to ensure many years of good service, we recommend that you clean and descale your macerator regularly.
How much does a Saniflo system cost?
Its suggested retail price for a full system with bowl and tank is $1,314.00 (elongated) or $1,280.00 (standard); although we sell all products at the lowest price allowed by the manufacturer, so you get a 15% discount: $1,116.90 (elongated) or $1,088.00 (standard).
Can you use any toilet with Saniflo?
What types of WC’s are suitable for use with SANIFLO macerator pumps? A SANIFLO macerator can only be fitted with a WC which is BS EN 33 or 37 Horizontal outlet. … A SANIFLO is normally discharged into a soil and vent pipe or discharge stack. However, it is possible to connect directly into the sewer at invert level.
Article first time published on
Why does my saniflo keeps running?
If the pump keeps randomly firing at different times of the day and night, then it’s likely you have a problem with the microswitch. This could be caused by either a fault with the rubber membrane that activates the switch or it could be that waste is lodged between the switch and the floor.
Is there a ventless toilet?
What is a ventless toilet and how does it work? Ventless toilets are just like regular ones, except there is no vent for the toilet to release the water vapor. Instead, they use a siphon action that pulls the water out of the toilet bowl into an underground waste pipe.
Can you plunge a Saniflo toilet?
Saniflo systems allow you to install a toilet in any room of any building where there is access to a waste disposal pipe. … Because of this, if you get a clog or blockage in your Saniflo, you cannot simply plunge the toilet to unblock it or you may damage the macerator.
Can a saniflo be wet vented?
STEP 12: The macerator pump must be vented into the house’s vent system, but it can be installed as a wet system vent.
Do you need building regs for Saniflo?
Regulations and requirements for installing a saniflo system Planning permission isn’t needed, but when you fit your Saniflo or other macerator system it will have to conform to Building Regulations. A professional builder or plumber should be up to date with these.
Where does the waste go from a macerator toilet?
Waste goes to the Saniflo or WasteAway unit when the toilet is flushed, instead of directly to an outflow pipe. The macerator technology then kicks into action. A blade spins at up to 3,600 rpm to pulverise waste into liquid in a matter of just seconds. The unit’s pump then comes to life.
Do you need planning permission to install a downstairs toilet?
Usually, adding a downstairs toilet to your home does not require planning permission, unless it is part of a larger extension. This does vary depending on where you live, whether your property is within a conservation area or is of historical significance. … Your new toilet will have to adhere to building regulations.
How far can a Saniflo toilet pump?
The waste can be pumped to a remote soil pipe up to 50 metres away if the unit is activated. Saniflo discharges vertically up to 4 metres maximum, or a lesser combination of vertical and horizontal pipe run.
Is saniflo a good idea?
Saniflo toilets are installable almost anywhere in the home, regardless of what your drainage system or plumbing setup happens to be. Because it is an upflush system, these toilets are an excellent addition to a basement bathroom where upward movement of waste is necessary.
Can you put a macerator toilet anywhere?
The biggest benefit that you receive when you purchase a macerating toilet is that they can be installed anywhere in the house whether you have a traditional plumbing or drainage system or not. These toilets are great alternatives for areas that were never intended to have a toilet.
Can you use bleach in a saniflo toilet?
It is important never to use products containing bleach in a saniflo macerator as bleach corrodes the seal around the macerator valve. … To avoid damaging a macerator, it is important to use a specially developed saniflo descaler product to clean and descale whilst being gentle on the system.
How much does it cost to install a saniflo toilet UK?
In general, you will spend around £200 – £500 on buying a saniflo toilet. For the toilet installation, you can expect to pay an hourly rate of £40 – £60. Depending on the complexity, the plumber could take between 10 – 16 hours to install it. To be safe, you need to budget around £500 – £800 for the installation cost.
How much does it cost to install an up flush toilet?
Upflush toilets typically cost $600-$800. A professional plumber can usually install one in an hour or two ($100-$200) for a total cost of $700-$1,000.
Can you connect a washing machine to a saniflo?
The Saniswift can also accept gray water from a washing machine through an indirect connection such as a laundry sink. … The Saniswift is a compact unit with attractive rounded contours that fits neatly into tight spaces.
Can I use flexible pipe for saniflo?
Do not use flexible or semi-flexible pipe. The Saniflush System requires a minimum of 1.6 gallons (6 liters) of water to clean the pump satisfactorily. Our self contained units require a minimum of 1 gallon (4 liters) of water. It is illegal to discharge into an open drain, ditch or manhole.
