Slide the POWER LOCK into the POWER OFF (unlocked) position. … Once all modules are in place, slide the POWER LOCK into the POWER ON (locked) position to energize and secure the modules into the controller.The Pro-C will automatically recognize the correct number of stations.
How do I add stations to my Hunter Pro C?
- Slide the POWER LOCK into the POWER OFF (unlocked) position. …
- Once all modules are in place, slide the POWER LOCK into the POWER ON (locked) position to energize and secure the modules into the controller.
- The Pro-C will automatically recognize the correct number of stations.
What does interval mean on Hunter Pro C?
ICC. Interval Watering is a feature that allows you to select the number of days to pass before the next watering day. For example, an interval of 3 will cycle the program once every three days and water on the third day. An interval of 1 is every day and an interval of 2 will water every other day.
How many zones does Hunter Pro C have?
The Pro-C controller is supplied with a factory-installed base module for up to 4 stations. Additional modules may be added in increments of 3 stations (PCM-300), 9 stations (PCM-900), or 16 stations (PCM-1600). In total, a conventionally wired system can be expanded up to 23 stations.
How much does a hunter pro c cost?
This item Hunter 6 Fixed Station Pro-C Sprinkler Controller PCC-6Hunter Sprinkler PCC1200I PCC 12-Station Indoor Irrigation ControllerAdd to CartAdd to CartCustomer Rating4.0 out of 5 stars (16)4.7 out of 5 stars (186)Price$13999$134.09$134.09Sold By✅ HomePlumbing ✅Sprinkler Warehouse
What is P MV on Hunter Pro C?
Switch Pump/Master Valve (P/MV)
Is there an app for Hunter sprinkler system?
Hunter Hydrawise Remote access is possible through either the Hydrawise app (iOS or Android compatible devices) or online through their cloud software. Key product features include: Predictive Watering Adjustments based on web-based weather data brings up to 50 percent in water savings.
How do you remove interval watering from Hunter Pro C?
Under the Water Days or Days to Water dial position on your controller you have three options. You can have the program run on specific days, an odd/even schedule, or an interval schedule. To move out of the Interval mode and back into one of your other two options simply continue pressing the or buttons.
How do you set intervals on Hunter Pro C?
Press the right button until ODD or EVEN is flashing, and then press the right arrow button one more time. The display will change to the interval mode and the Interval Day number will be flashing on the upper left of the display. You will see the word “interval” below the number.
How do you program Rainbird cycle and soak?
So rather than watering for 24 minutes straight, your controller will “Cycle” for 8 minutes, wait 52 minutes for the water to “Soak” in, Cycle for another 8 minutes, wait 52 minutes for the water to soak in again, and then finally water for a final 8 minutes, for a total of 24 minutes.
Article first time published on
How do I reset my Hunter controller?
- Unplug the controller’s transformer.
- Press and hold down the, and buttons.
- Plug the controller’s transformer back in.
- Release the , and buttons. The display should now show 12:00am. All the memory has been cleared and the controller may now be reprogrammed.
What is a station on a sprinkler system?
STATION. A circuit on the controller which activates a single control valve in the irrigation system to control watering for a particular zone.
What is the best time of day to water your lawn?
Watering in the morning (before 10 a.m.) is the best time for your lawn; it’s cooler and winds tend to be calmer so water can soak into the soil and be absorbed by the grass roots before it can evaporate.
How long should you run each sprinkler zone?
Water Thoroughly: Rotor zones should run for about 30-40 minutes per zone and spray zones 10-15 minutes per zone.
How do I set the time on my hunter node?
To set the time and date on the node press the center button, simply scroll through the choices using the left and right arrow buttons and adjust the displayed item using the plus and minus buttons. Push the button until the icon is displayed. All 4 digits will be displayed representing the year.
How do I turn on my Rainbird sprinkler system after winter?
- Turn on the main water supply for the sprinkler system. …
- Open the ball or gate valve all the way once you hear the water rushing through the pipe.
- Press the “Manual” start button on the Rainbird controller.
How do I bleed the air out of my sprinkler system?
Manually turn at least two of the circuit valves on. This flushes out the main pipe more quickly by opening up the pipes in front of it, which in turn forces the air out. Turn off the irrigation system after five minutes of flushing, and then restore the circuit valves to their original position.
What is Hunter Solar Sync?
The Solar Sync ET sensor is an advanced weather sensor that calculates evapotranspiration (ET) and adjusts Hunter controllers daily based on local weather conditions. Solar Sync measures sunlight and temperature, and uses ET to determine the correct seasonal adjustment percentage value to send to the controller.
