Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).
Where do I find my faucet model number?
The model number is printed on a tag that is attached to the cold water supply line of the faucet. The supply line is located below the sink, countertop, bath rim, or behind the bowl of a bidet. The model number, or part number, is typically preceded by “P/N.”
Do all Moen faucets use the same cartridge?
There is absolutely NO difference between the Moen 1222 vs 1222B replacement cartridges. They are both the replacement part cartridge for the Posi Temp Moen shower valve. They are made from the same parts, the only difference is their packaging and model number.
What is the difference between Moen 1200 and 1225?
Moen 1200 has an all-round brass design which ensures longevity in the long run. But in terms of performance, Moen 1225 can offer you better performance with its 1GPM water discharge rate. While Moen 1200 does not support Posi-Temp shower valves, Moen 1225 is compatible with almost any faucet.
How do I find my Moen cartridge number?
If not the series number can be usually be found on the underside of the faucet or on the decorative escutcheon ring that goes around it. The second way to identify your Moen valve cartridge is to remove the old one. You will do this by first shutting off the hot and cold water feed to your shower.
How does the Moen Posi Temp valve work?
How the PosiTemp Faucet Works. Behind the handle of a Moen PosiTemp tub and shower faucet are built-in stops that limit how far the handle can turn. … The valve is designed to balance the incoming flow of hot or cold water, even when the pressure varies due to another faucet being turned on or a toilet flushing.
What is the difference between Moen cartridge 1225 and 1225B?
The difference between the 1225 and the 1225B is with the packaging. The cartridges are exactly the same, the package in which the part is displayed is different.
Where is the model number on a Moen shower valve?
Exact model numbers can be found on your box or on your instruction sheet. If unavailable, you may find the general family series number on the back of the spout (non pullout).
What size Allen wrench does Moen use?
For the most part, Moen uses hardware that will require a 7/64 inch hex wrench. This applies to Moen Renzo faucets, handle set screws on one-handle kitchen faucets, and PosiTemp levers in Moen showers.
How do you tell if you have a Moen Posi-Temp valve?
Models that have a lever or knob that rotate only are called Posi-Temp. This “cycling valve” handle is pointed towards the 6:00 position when off, rotates to the 3:00 position for cold, 12:00 for warm and 9:00 for full hot. If this is the way your Moen valve operates, any Posi-Temp trim will fit.
Article first time published on
What year did Moen Posi-Temp come out?
The design goal is to maintain the temperature of the shower for safety and comfort reasons, even if the volume of water is reduced. This was followed by the Posi-Temp cycling valve in 1985, which uses the larger 1222 cartridge.
What is the difference between Posi-Temp and Moentrol?
Moentrol and Posi-temp is up to the user. With Moentrol you can set the temp and pull the handle to get your pre-set temp. With Posi-temp you have to pass cold to get to hot and no volume control.
How long do Moen 1222 cartridges last?
These go bad every 3-5 years, and it’s a ridiculously expensive price for such a simple item.
What does a hex wrench look like?
The Allen wrench itself is a small L-shaped wrench with six sides. If you look at a cross-section of the Allen wrench, it looks like a hexagon. … When you need to use the Allen wrench, stick the short end of the L shape into the bolt head and press down on the longer side of the L to turn the bolt.
How do you remove a Moen kitchen faucet handle?
Some Moen faucets have handles that remove by loosening the screw in the back of the handle. To loosen this screw use a 3/32″ hex wrench. After the handle has been removed unscrew the spout collar nut by turning counterclockwise then lift and rotate the spout.
How do I know my Allen key size?
Measure the Hex Key Hex keys measurements are done across-flats or AF. This simply means that they are measured from one flat side of the head to the one directly across from it.
Where can I get free replacement parts for Moen?
Replacement parts may be obtained by calling 1-800-289-6636 (Canada 1-800-465-6130), or by writing to Moen Incorporated, 25300 Al Moen Drive, North OImsted, OH 44070-8022. Proof of purchase (original sales receipt) from the original consumer purchaser must accompany all warranty claims.
