In manual mode, run the jacks to level the trailer. … Once the trailer is level, turn off the touch pad.With the touch pad off, press and release the “FRONT” button five (5) times and then press and release the “REAR” button five (5) times.
How do I reset my Lippert auto leveling control?
- In manual mode, run the jacks to level the trailer. …
- Once the trailer is level, turn off the touch pad.
- With the touch pad off, press and release the “FRONT” button five (5) times and then press and release the “REAR” button five (5) times.
How do I reset my LCI controller?
TROUBLESHOOTING – ERROR MODE Operator must press “ON/OFF” button to reset operation. NOTE-All normal features and functions will be disabled. If TOUCH PAD and CONTROLLER lose communication for more than 5 seconds, the TOUCH PAD will flash the ”JACKS DOWN”, “ENGAGE PARK BRAKE”, and “ON/ OFF” lights.
How do I reset my 6 point Lippert?
- Turn “ON/OFF” button “OFF”.
- Push “FRONT” button 10 times.
- Push “REAR” button 10 times.
- Control will flash and beep, LCD says “ZERO POINT CALIBRATE”.
- Manually operate the jacks to attain unit level condition (use carpenter’s level).
What does out of stroke auto level?
If you get the Out of Stroke error message on the Lippert Ground Control system, such as # LC358590, then that indicates that the jack has extended as far as it will go and cannot go any further.
How do you reset the equalizer leveling?
Depress and hold the Auto-Level button and press and release the Power button and listen for a series of beep. After the Keypad has beeped 5 to 6 times, release the Auto-Level button (the Keypad will continue to beep as long as the Auto-Level button is held).
How do you manually level LCI electronic leveling?
- Push “ON/OFF” to turn the system on.
- Push the “UP” arrow once, or until the screen reads “MANUAL MODE”.
- Push the “ENTER” button once.
- Push the “FRONT” button to extend the front landing gear legs.
- Push the “REAR” button to extend the middle and rear landing gear legs.
How do I manually retract my power gear jacks?
To operate the left rear jack, hold down the Left + Rear buttons + “AUTO” to extend, OR “MAN” to retract the jack. To operate the right rear jack, hold down the Right + Rear buttons + “AUTO” to extend, OR “MAN” to retract the jack.
How does level Mate Pro work?
LevelMatePRO® is a wireless vehicle leveling system that accurately reports how much height is required to reach a level position and tells you where that height is needed. It wirelessly connects with your smartphone or tablet, where an easy-to-use app displays the needed leveling information.
How does an automatic level work?
An automatic level, self-levelling level, or builder’s auto level includes an internal compensator mechanism (a swinging prism) that, when set close to level, automatically removes any remaining variation. This reduces the need to set the instrument base truly level, as with a dumpy level.
Article first time published on
What is the principle of auto level?
The automatic level has a compensator mechanism that uses a combination of fixed prisms or mirrors and a moving prism suspended on a pendulum to give a horizontal reference. When correctly set up the compensator will ensure that the ray of light through the centre of the reticule is exactly horizontal.
What is the use of auto level?
A dumpy level, builder’s auto level, leveling instrument, or automatic level is an optical instrument used to establish or verify points in the same horizontal plane. It is used in surveying and building with a vertical staff to measure height differences and to transfer, measure and set heights.
How do I reset my equalizer Jack?
Depress and hold the AUTO-LEVEL keypad button. Continue to hold the AUTO- LEVEL button and press then release the POWER button, and listen for a series of beeps. After the panel has beeped 5 to 6 times, release the AUTO-LEVEL button (the keypad will continue to beep as long as the AUTO-LEVEL button is held).
