Open the Health Mate app.Tap Get Started.Tap Scales.Tap Body Cardio.Tap Install now.Press and hold the side button for four seconds.Once the app connects to the scale, tap Next. It may take up to a minute for your scale to be detected by your mobile device.Tap Pair.
How do I connect my Withings scale to my WIFI?
- Open the Health Mate app.
- Go to Devices.
- Tap Body.
- Tap Wi-Fi Configuration.
- Press the button at the back of the scale and tap Next.
- Tap Next. …
- To install your scale in Wi-Fi, perform the following steps:
How do I charge my Nokia body cardio?
To do so, connect your Body Cardio to a power source using the USB cable provided with the scale. Charging the battery can take up to 5 hours. You can press the button on the side of the scale while it’s charging to check the battery level. You shouldn’t use your scale while it is charging.
How do I reset my weight scale?
Remove all batteries from the back of your scale. Leave the scale without its batteries for at least 10 minutes. Make sure that the battery compartment is clean, and the contact terminals are free of debris or residue. Check that the batteries have the correct polarity and reinsert them firmly in place.
How do I pair Nokia body scale?
- Pull the tab out of the battery compartment if it’s the first time you install your scale.
- Open the Health Mate app.
- Go to Devices.
- Tap +.
- Tap Scales.
- Tap Wireless Scale.
- Tap Install.
- Press the pairing button at the back of the scale for two seconds and tap Next.
How do you set up body cardio?
- Open the Health Mate app.
- Tap Get Started.
- Tap Scales.
- Tap Body Cardio.
- Tap Install now.
- Press and hold the side button for four seconds.
- Once the app connects to the scale, tap Next. It may take up to a minute for your scale to be detected by your mobile device.
- Tap Pair.
How do you set up a scale?
- Place the scale on a flat surface in your bathroom, preferably not carpet. …
- Turn the knob at the base of the scale until the needle points directly to zero. …
- Step onto the scale until the needle comes to rest at your weight. …
- Check your scale’s batteries. …
- Set the scale on an even surface.
How do I connect my Withings scale to my phone?
- Once the scale is found, press ‘Next’.
- Tap ‘I don’t have a WiFi Network’ if you just want to connect the scale via Bluetooth. In that case, continue to Step 14.
- Tap ‘Set up another network’.
- Enter the password of your WiFi network and press ‘Next’.
- Press ‘Done’. …
- Press ‘Invite’ if you want to add other users.
How accurate is Withings body cardio?
The Body Cardio is a very accurate scale (it even takes the gravity at your location into account) and pegged my weight to within 0.2 pounds nearly every time. The bone, fat and water composition measurements were also consistent.
How do I set up my Withings watch?
- Open the Health Mate app.
- Tap Sign up.
- Tap Watches.
- Tap Steel.
- Tap Install.
- Push the reset button located at the back of your Steel using the tool it came with. …
- Put your Steel close enough to your iOS or Android device. …
- Enter your email address, password and then confirm your password.
Article first time published on
How do I connect my Withings to the Internet?
- Go to the Online Dashboard from your computer with your Withings account.
- Select the Menu icon in the upper right-hand corner.
- Select My Devices.
- Select Other devices.
- Select Configure a Wifi Body-Scale WBS01.
How do you calibrate a weighing scale device?
To calibrate a digital scale, set it on a flat surface and choose a weight. Turn the scale on and go into calibration mode. Put the weight on the scale and wait for it to calculate the total weight. If the weight is off, hit the calibration button and wait for it to recalibrate.
How do I calibrate my weighing balance?
- Turn on the electronic balance.
- Ensure it is levelled and stable; and is placed away from any draughts.
- Enter the balance into Calibration Mode (instructions for this will be found in the product manual). …
- Select Span Calibration (as per the manufacturer instructions)
Why is my Withings scale not working?
Make sure you’re using alkaline, non-rechargeable batteries. Make sure the metallic contacts of the battery compartment are touching the batteries and that they are not dirty or corroded. … Make sure the batteries work properly. You can try using new batteries to see if that’s where the issue comes from.
What batteries do Withings scales take?
Body+ – What is the typical battery life of my Body+? Your Body+ has an approximate battery life of 18 months using four standard AAA batteries. You can check the battery level by opening the Health Mate app and going to Devices.
How do I calibrate my Nokia scale?
Tap the scale once before stepping on it to weigh in. Go to the settings of the online dashboard. Click the Devices tab. Click the Auto-calibration box.
What is athlete mode?
What is Athlete Mode? Athletic users have a body composition that needs to be calculated differently than the average person. This mode simply informs the scale to lower fat mass measurements and increase muscle mass measurement values to match the characteristic lifestyle and body composition of an athlete.
What is Athlete Mode on Nokia scale?
When Athlete mode is enabled, Fat Mass measurement values will be lower and muscle mass measurement values will be higher because the user’s athletic body type is taken into account.
How do you set a digital scale?
- Turn the digital scale over. Remove the battery compartment lid. …
- Place the batteries back into the digital scale in the same position they formerly occupied. …
- Place the digital scale on a flat surface. …
- Turn the digital scale on. …
- Place the nickel on the platform.
How do I reset my health meter scale?
- Place the Health-O-Meter scale on a flat surface. Make sure the scale is indeed level. …
- Tap the lower left or right corner of the scale three times. After you do this, you’ll notice the display shows “—.”
- Wait a few seconds for the scale to reset and recalibrate.
Why is my digital scale not working?
Battery problems are often the cause behind digital scale display and function issues. … Use a small, clean paintbrush or cotton swab to sweep the compartment free of dust or debris that might interfere with the battery connection. If that doesn’t solve the problem, try replacing the batteries with fresh ones.
How do you update your cardio scale?
You can force the internal software update from the Health Mate app by going to Devices, tapping the name of your scale and then tapping Check for updates. You can then follow the instructions on the screen.
How long does it take to set up Withings scale?
Troubleshooting steps for your Withings Body scale It may take up to five minutes for new weight values to transfer from your scale to the One Drop app. Check your internet connection. Your phone requires an internet connection to import any new weight values from your scale.
Are withings and Nokia scales the same?
Existing Withings scales, blood-pressure cuffs and trackers are getting Nokia branding, with new health products taking the name as well. Withings fitness products like the Steel HR watch will be branded as Nokia ones from here on in. … Now, Withings and its app have been officially rebranded under the Nokia umbrella.
How does withings measure PWV?
The Withings Body Cardio scale tracks weight variations which happen as the heart beats, and then combine that with changes in the body’s electrical current when the blood flow reaches the feet. By comparing the time difference between blood section by the heart, and its arrival at the feet, it can calculate PWV.
What is pulse wave velocity Nokia?
Withings defined PWV as “the speed at which heartbeat-generated vibrations spread out along the arterial wall.” At the time of the launch the company also said PWV is a key predictor of hypertension. The future of the PWV feature is still up in the air.
Why won't my Withings scale connect to my phone?
Try rebooting your router if necessary. Make sure you don’t have unassigned measurements showing up in the menu of the app. Log out of the app and then log back in if your data appears on the web dashboard. If necessary, use the embedded diagnosis tool by pressing the button at the back of the scale for 8 seconds.
How do I sync my Withings?
- Make sure you enable Bluetooth on your mobile device.
- Make sure the Health Mate app is open.
- Press and hold the button at the top of your Withings Pulse for three seconds to start the manual sync. Your Withings Pulse has to be close enough to your device.
How do you program a Withings scale?
Turn your Body+ over and look for the button beneath your scale. Hold the button for 8 seconds and release it. Turn your scale back and look at its screen, three options are displayed: mac, upgrade and reset. Press the button again until the arrow is pointing to reset.
