How do you drill a Pinewood Derby axle

Standard Pinewood Derby car blocks have grooves in the bottom of the car for the axles guides. … Allows you to drill accurate axle guide holes that are square and true into the existing axle slots with a hand drill! Your car will go faster if the axles are mounted correctly!

Can you drill axle holes Pinewood Derby?

Standard Pinewood Derby car blocks have grooves in the bottom of the car for the axles guides. … Allows you to drill accurate axle guide holes that are square and true into the existing axle slots with a hand drill! Your car will go faster if the axles are mounted correctly!

Where do you drill a Pinewood Derby car?

Drill evenly spaced 3/8″ holes for steel and tungsten cylinder weights. …
For drilling weight holes in the back, bottom and side of the car.
Drill straight into the car block or at an angle to match the slope of wedge type cars.

Is it legal to polish Pinewood Derby axles?

Is it legal to polish Pinewood Derby axles? Official derby axles from the official kit that are lathed and polished to remove all imperfections. Axles are legal in all races. … If you want additional polishing, we recommend polishing with a metal polish or pumice.

Do you glue Pinewood Derby axles?

7. Create Glue Holes: Glue the axles firmly in their holes to ensure that they stay perfectly placed, but make sure you don’t get glue on your wheels. 8. Add Weight: Remember to make your Pinewood Derby car as heavy as the rules allow.

How heavy is a Pinewood Derby block?

The standard pinewood derby block is approximately 7.0 inches long by 1.75 inches wide by 1.25 inches tall. It has a typical density of 0.0138 lbs/in3. The block is supplied unsanded with grooves cut on the bottom side to accept the axles. The blocks weigh approximately 3.4 ounces.

Where do you bend Pinewood Derby axles?

We recommend installing axles with a 1.5° bend for the front of the car and 2.5° bend for the rear. The axles heads are marked in the direction of the bend. Install the axles with the mark straight up. The alignment procedure requires turning the axles while they are in the car slot.

Should I bake my Pinewood Derby block?

Should I bake the pinewood derby block? The short answer is no, do not bake the block. The idea behind baking the block is to remove moisture which will make the block lighter. … Baking might remove more moisture but the block will quickly re-absorb the moisture after it is out of the oven and cooled down.

What kind of saw do I need to cut a Pinewood Derby car?

Band saws are the best tool for cutting a Pinewood Derby car block. If you don’t have access to a band saw, a coping saw will do. Coping saws are economical and can cut unusual shapes and curves. Coping Saws are intended for cutting curves in thin material but they can be used for cutting your Pinewood Derby car.

Can wheels be redrilled?

Whether done at home or at a professional wheel shop, re-drilling a wheel will mess with the structural integrity of the wheel. … Reputable wheel shops can then drill out the lug holes to your required bolt pattern. These types of wheels are safe to be drilled and should be of no problem.

Article first time published on

Can you're drill wheels to change stud pattern?

Depending on your preference, our team can either drill blank wheels, or redrill and insert to change the stud pattern.

What vehicles have a Ford 8.8 rear end?

1986-2014 Ford Mustang.
1982-2012 Ford F-150.
1982-1996 Ford Bronco.
2001-2005 Ford Explorer Sport Trac.
1991-2011 Ford Ranger 4.0L models.
1991-2001 Ford Explorer (Solid axle)
1985-2011 Ford Panther platform vehicles.
2012–Present Ford F-150 (Super 8.8, depending on engine and other options)

Can you make rim holes bigger?

Yes, you can change a wheel bolt pattern with impressive results too, just like bolt holes. … In order to drill a new bolt pattern, you should at first drill a 1/8 inch hole for all new bolt holes. Afterwards, cut out the centre and bolt it down using a sharp drill bit.

What are wobble bolts?

What are Wobble Bolts? The correct term is PCD Variation Bolts. This type of bolt has a unique rotating washer collar that sits beneath the hex and above the threaded stud. The 60° tapered collar is able to move 2.3mm in any given direction.

How far apart should the wheels be on a Pinewood Derby car?

The wheel base (distance from front axle to the rear axle) may not be altered. The cut slots must be used for the axles and the wheel base distance must be 4-1/4 to 4 3/8 inches. 8.

How can I make my Pinewood Derby wheels faster?

Put all of your weight in the back. …
Lube the car at the body/wheel friction point. …
Spend a fair amount of time on axle prep. …
Make sure your wheels are ready. …
Finally, once your wheels are mounted, check their alignment.

What is the maximum weight for a Pinewood Derby car?

MAX OUT YOUR CAR’S WEIGHT AT 5 OZ In most races, a Pinewood Derby car’s weight is limited to 5 ounces. If your car weighs less than that, add coins or other weights. As far as where you should attach those weights to your car … well, let’s just say opinions differ.

What can I use for pinewood derby weights?

Zinc Top Weight.
Lead Wire Weights.
Tungsten Weights.
Tungsten Canopy.

What is the official length of a pinewood derby track?

Wood tracks are usually 32 feet long and aluminum tracks are 45 feet long. Alunimum provides a smoother surface than wood and is more durable. The advantage of wood is that you can usually scrounge up most of the material at low cost. The track should be about four feet high at the starting gate.

How thick should my Pinewood Derby car be?

It kinda depends on what weight you are using. If you are using, say, tungsten cubes you can make an 1/4″ thick car. If you are using other less dense weight then you could be 3/4″ think in the back to have enough real estate to hide the weight. I would shoot for a 5/8″-1″ COM, nothing less than 5/8″ though.

What month is Pinewood Derby?

The Pinewood Derby is frequently held in January or February, but there is no official date. Local Cub Scout packs can schedule their race for any time throughout the year. Many packs distribute Pinewood Derby kits in December so that Cub Scouts can work on their cars over the holiday break.