Look for an adjustment nut on the end of the U-shaped plate attached to the handle if the weight is still attached to the linkage. Turn this nut clockwise through three or four rotations with a pair of adjustable pliers to shorten the linkage. Feed the linkage back into the overflow hole and let the weight fall freely.
How do you fix a bathtub drain that won't stay open?
Look for an adjustment nut on the end of the U-shaped plate attached to the handle if the weight is still attached to the linkage. Turn this nut clockwise through three or four rotations with a pair of adjustable pliers to shorten the linkage. Feed the linkage back into the overflow hole and let the weight fall freely.
Why won't my pop up plug stay down?
Adjust the nut. If the stopper moves as it should but doesn’t stay put, all you need to do is tighten the nut (turn it clockwise). If the action is too stiff, loosen the nut a little. Check the action and adjust until it feels about right.
How does a bathtub trip lever work?
With the trip lever down, the plunger is lifted and the drain is open; when the trip lever is up, the plunger is forced down and the drain is closed. And if the tub is accidentally overfilled, excess water can still run down the overflow tube behind the trip-lever plate and can drain away because the plunger is hollow.
How do you remove a trip lever drain stopper?
- Set the drain to its open position.
- Unscrew the faceplate that is mounted to the overflow drain.
- Pull the faceplate free and the rest of the drain stopper’s connected hardware should follow. …
- You may need to wiggle the drain stopper to free its entire length.
Why does my bath plug keep popping up?
If your sink pop-up won’t pop up or seat properly, fixing it is quite easy—usually just a matter of adjusting a few parts. The culprit is often a buildup of hair around the base of the stopper or the pivot rod mechanism. … You have to extract the stopper to clean it. On some sinks, you may be able to pull it right out.
