Begin by marking off the proper height from the floor on your wall (5’8” or 1.73m). … Apply the metal Mounting Feet to the back of your dartboard, using the Stabilizer Screws. … Drive the Dartboard Center Screw into the pre-drilled hole, leaving space to hang the dartboard onto the Mounting Bracket.
What do you use to mount a dartboard?
Use a stud finder to locate a stable place to hang your dartboard. Use wood screws instead of nails because they are made to grip into the wood and provide a better hole. The threads in a screw will prevent any drooping, swaying, or falling of your dartboard.
What are the measurements for hanging a dart board?
Dart Board Height: 5 feet. 8 inches from floor to the center of the bull’s-eye. Distance from front of the dartboard to the throwing line: Steel Tip: 7 feet 9 1/4 inches, Soft Tip: 8 feet 0 inches. To mark the throw line a simple piece of tape will suffice.
Can you hang a dart board with Command Strips?
If it’s a lightweight soft-tip board, no problem. If it’s a real steel-tip dartboard, then no. Even if you used enough Command strips to get it to stay up there, eventually the combination of weight and gravity is going to pull your sticky contraption off the wall.
How do you hang a dart board in a cabinet?
Position the dartboard into the cabinet and slip the head of the center screw into the mounting bracket. If the board is too loose, remove it, tighten the screw slightly and then remount the dartboard. Position the dartboard with the 20 position pointing straight up.
What is the distance from dartboard to throw line?
Setup the dartboard throwing distance to measure 7 Feet 9 and a quarter inch from the front of the dartboard to the front of the Oche (Throwing Line). The throwing distance can also be measures as 93.25 inches, 2.37 meter or 237 centimetres.
How far back from the dartboard do you stand?
The international standard distance is 9 feet, 7 and 3/8 inches (or 2.98 meters).
Can I hang a dartboard on drywall?
To hang a dartboard on drywall, it’s best to mount the board to a wall stud. The stud provides ample support for the dartboard’s weight. A board can weigh 10 pounds or more, enough to rip the mounting screws out of drywall if the board is hung from drywall without wall anchors.
How far should the Oche be from the dartboard?
Dart Board Measurements: Standard height from the floor to the bullseye on the dartboard is 5 feet 8 inches, while the oche (distance between the front of the board and the toeline) should measure 7 feet 9.25inches.
How much does a dartboard weigh?
A high quality bristle dartboard is at least 10 lbs. This weight combined with the force of pulling darts from the board on a regular basis makes using anchors in a dry wall seem pretty risky.
Article first time published on
Why is a dartboard laid out the way it is?
The numbering of a standard dartboard is designed in such a way as to cut down the incidence of ‘lucky shots’ and reduce the element of chance. The numbers are placed in such a way as to encourage accuracy. That’s it.
How do you stabilize a dart board?
Stabilize the board by placing the screw slightly higher than the bracket. Line up your dart board by keeping the 20 scoring area vertical as you place the dartboard into the wall bracket. Make sure the disc is attached. Once the brackets are mounted, align the board and drop it into the wall brackets.
How do you fix a dartboard cabinet to the wall?
Pre-drilled holes in the four corners of the cabinet should line up with the wall studs (16 inches apart). Use a tape measure to place the center mark that you made in step 3, 68 inches (173 mm) above the floor. Use the screw holes as a template to mark the wall for the screw holes. Remove the cabinet.
What do I put on the wall behind a dart board?
A dartboard cabinet is the best wall protection for dart boards. Not only can it protect your wall, but your dartboard as well. It also offers many other benefits. It is decorative, can hold your stuff, acts as a scoreboard and protects your dartboard when not in use.
Why is it called the Oche?
‘Oche’ as a word meaning the throwing line that a dart player stands behind to throw his or her darts is comparatively recent, being introduced by the British Darts Organisation in the mid-1970s. The actual word is believed to be derived from Old Flemish meaning a ‘notch’ or ‘nick’.
How do you stand when throwing darts?
But the best stance for playing darts is probably somewhere in the middle – with your torso and shoulders aligned and at an angle somewhere between 45-90° on to the board. Both shoulders should be level and parallel to the ground. Your front foot can stay flat and at an angle that feels comfortable at the toe line.
Why are there different distances on a darts mat?
In general people play from 7ft 9 1/4in line which is regulation in both the BDO and PDC. The other lines are really just used as a variation in different locations/leagues or just to mix it up. The 8ft line is often used when playing on a soft tip board as used frequently in North America and Asia.
Why is 26 in darts called breakfast?
: Bed And Breakfast or Half-a-Crown or Murphy: A British term for the score of 26 in an 01 game, from hitting a 20 and one each of the adjacent numbers, 1 and 5. So called because breakfast used to cost 26 pence.
Can your elbow cross the line in darts?
You can lean over the throw line (otherwise known as the oche) in darts just as long as your feet do not go over the line. Whether there is any benefit to leaning over the line will depend on how it affects your balance as you need a stable stance for an accurate throw.
Does a Robin Hood in darts count?
A Robin Hood in darts does count as a throw but does not count for points. The reason is that in order for any dart to count for a score, the tip of the dart MUST come into contact with the dartboard, and must stay in the board.
Which country invented darts?
So, who invented darts? Modern darts was invented by a carpenter from Lancashire named Brian Gamlin in 1896. However the history goes back much farther. Darts began as a military pastime originating in England during the medieval era in the first couple of decades of the fourteenth century.
Can you put a dartboard on plasterboard?
Just a dartboard is no problem at all. I mounted my board using 2 drywall anchors as well.
