Open the valve control knob on the propane tank by turning it counterclockwise.Push in and turn the knob on the front or side of your heater to the “Start” or “Light” position.Push and hold the knob to unlock the propane valve in the heater and send gas to the unit.
What do you do when your propane heater won't light?
If your propane heater sparks but will not light, the gas cylinder that supplies it may be empty or the gas may even be shut off. Check to be sure, and if there is still a problem carefully clean the gas valve using a needle.
Should the pilot light always be on in a gas heater?
Leaving the gas on keeps this compound moving out of the tubes. Keeping the pilot light on will also keep moisture out of the unit and in turn, help prevent corrosion. … As you can see, it’s probably best in most cases to extinguish the pilot light in your gas fireplace during the months when you don’t need heat.
Why won't my pilot light stay lit on my gas heater?
If your pilot light won’t stay alight, it might be the thermocouple. Sometimes dust buildup collects on the thermocouple and blocks the sensor. Try cleaning the thermocouple and then relighting the pilot light. If it continues to go out, the thermocouple might need to be replaced.
How do you light a patio heater manually?
- Ensure there are no leaks and the heater is in good repair.
- For automatic ignition systems, hold the control knob in and use a lighter to ignite the flame.
- For non-automatic systems, turn the control knob to the lowest setting and use a lighter to ignite the flame.
Can you light a patio heater with a lighter?
Light the Patio Heater You can use any kind of lighter that you may have, but a candle lighter is the safest way to avoid burning your fingers. … Once the candle lighter is in the hole, light it, and your patio heater should begin to get hot.
Why does my outdoor heater keep turning off?
One common issue that patio heater owners face is keeping their patio heater lit. The typical cause for this is that the pilot light flame has become too far away from the thermocouple. Thus, the thermocouple will turn off the patio heater as it tricks the gas value in to thinking that the pilot light is out.
Can you use a Coleman heater indoors?
The Coleman Catalytic Heater is designed to be used both inside and outside, so you may not need to same amount of ventilation that you might need when using other types of gas heaters.
How do you turn on a Coleman heater?
- Check the air filter. It’s always a good idea to check the air filter before operating the furnace additionally or at the start of the season. …
- Do a quick inspection. …
- Flip the power switch. …
- Adjust the pilot light as needed.
How do you know if the pilot light is on?
If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame. If you don’t see a flame, your pilot light is out. If there is a flame, check the color. Pilot lights should always be blue.
Article first time published on
How much does it cost to relight a pilot light?
Most service providers will charge a standard fee per visit that typically covers the cost to relight a gas water heater. This service call price can range from $80 to $100.
Will gas leak if pilot light is off?
If the pilot light goes out on a storage or instantaneous hot water heater, space heater or a ducted heater, you will not have a gas leak. This is because all modern gas appliances with pilot lights have a fail-safe device that closes off the gas to the appliance in the case when the pilot may go out.
What do you do when your pilot light goes out?
Your pilot light relies on your natural gas to stay aflame, so if your gas is shut off, your pilot light will go out. Simply turn your gas back on and either relight your pilot light yourself or call a professional.
Why is the pilot light going out?
A faulty, misaligned, dirty, or damaged thermocouple is often the culprit behind your pilot light going out. The thermocouple is an automatic safety shutoff device that prevents the gas valve from opening if the pilot light is out.
What's a thermocouple look like?
The thermocouple looks like a piece of metal tubing smaller than a soda straw. To find it, first locate the gas control box. This is the box that the main gas line enters, where you turn the gas on in the furnace. (On most furnaces, it also houses the button that you hold open or push to relight the pilot.)
How much propane does a pilot light use?
We have calculated that a standard pilot light uses 416.88 cubic feet of natural gas or 4.723 gallons of propane per month.
Should pilot light be turned off in summer?
A little heat is produced when your pilot light is on so turning it off in summer can help reduce the heat inside your home. The less heat there is, the less you have to use your air conditioner needs to cool down the house. You can get savings and conserve energy if you turn off your pilot light.
How long do you hold a pilot light?
All you have to do is hold the pilot knob down for 30 seconds and hold the ignition button at the same time. You do not need to use a lighter. Your pilot light will turn on!
How do you light a patio heater without a pilot light?
- Make sure heater is in the “off” position and propane tank is completely closed.
- Attach propane tank and open slowly until is in a fully open position.
- Depress gas control knob and turn to the “low” position. …
- Continue to keep gas control knob depressed for 30 seconds.
Can you manually light an outdoor heater?
To manually light a patio heater with a pilot ignition system, all you have to do is push and turn the control knob and then press the stick button a few times. To light up a patio heater without a pilot ignition system, you will have to factor in the gas control knob as well.
How do you clean a thermocouple on a propane heater?
Cleaning a patio heater thermocouple requires shutting off the fuel supply, removing the thermocouple from the pilot assembly and using a dry sponge or steel wool to clean accumulated debris and soot.
How do you know if you have a bad thermocouple?
If you can’t get the flame to light at all, and you’re sure the gas is on, there’s probably an obstruction in the pilot tube. If the flame lights and goes out when you release the gas control knob after holding it in for the recommended 20 to 30 seconds, that’s the sign of a thermocouple malfunction.
How do you clean a propane patio heater?
Clean using a soft cloth and stainless steel cleaner/polisher. Turn the valve on the LP cylinder all the way on. Depress the patio heater control knob and turn it counterclockwise until it stops. Continue holding the control knob depressed for 1-2 minutes.
