There’s usually a gas unit with a control panel that controls the pilot light and the flames. The unit uses noncombustible artificial logs with holes in them, fitting together just right for the flames to pass through. The ventless fireplace works in a U-shaped path.
Do ventless gas fireplaces have a pilot light?
There’s usually a gas unit with a control panel that controls the pilot light and the flames. The unit uses noncombustible artificial logs with holes in them, fitting together just right for the flames to pass through. The ventless fireplace works in a U-shaped path.
Does the pilot light always stay on in a gas fireplace?
Should the pilot light always be on in a gas fireplace? Most gas fireplaces rely on a “continuous pilot light,” a type of pilot that remains lit so long as gas is flowing to the unit. … If you have a continuous pilot light system, you should always see a pilot flame unless you have manually turned the system off.
Why can't I light the pilot light on my gas fireplace?
Check Your Igniter and Thermocouple If nothing is blocking the tubing, and gas is flowing out, there might be something wrong with the spark igniter and thermocouple. Make sure there’s no debris lodged between the two. If the pilot light ignites but doesn’t stay lit, you might need to replace the igniter.
How do you turn on a pilot light?
Turn the gas regulator valve to the “pilot” position. If the water heater has a manual “ignite” button, press that to light the pilot. If it doesn’t have the button, or the button fails, press the regulator valve and hold a grill lighter or long match to the pilot light valve until the pilot ignites.
Can I relight the pilot light by myself?
If your pilot light goes out, your furnace will not be able to produce heat because its burners will not ignite. Often, homeowners can relight the pilot themselves.
Where is my gas fireplace pilot light?
Locate the gas control knob, which should have settings for “Pilot,” “On,” and “Off.” Look around for a red or black button; this is the piezoelectric spark igniter. Press the button a few times to verify that there it creates a spark at the end of the pilot tube.
How do you light an old gas fireplace?
The pilot knob has three positions: on, off and pilot. Move the pilot knob to the pilot position. This will allow you to push the knob in, which manually releases the flow of gas to the pilot. Now, while holding the pilot knob in, push the igniter button in once every second until the pilot is lit.
Where do you light a pilot?
Step 1: Find the pilot light assembly. It’s usually near the bottom of the furnace and has a gas valve with on, off, and pilot settings. Step 2: Turn the valve to off and wait three minutes.
How do I know if my pilot light is out?
- Locate the front cover panel on your furnace. It should be a little door that’s easily visible. …
- If your pilot light is on, it should be easy to see – your eyes will be drawn to the little flame.
- If you don’t see a flame, your pilot light is out.
- If there is a flame, check the color.
Article first time published on
How much does it cost to relight a pilot light?
Most service providers will charge a standard fee per visit that typically covers the cost to relight a gas water heater. This service call price can range from $80 to $100.
How do you light a pilot without a lighter?
Some modern gas water heaters will have a red button or switch near the regulator valve that is labeled something like “Pilot ignition” or “Ignite.” If your heater has an igniter, don’t use a lighter, just press the button to light the pilot light.
