How do you mount a live edge on mantel

Most live edge style mantels are around 3.5 to 4 inches thick. There are five common styles of mantels that are popular to make.

How thick should a live edge mantel be?

Most live edge style mantels are around 3.5 to 4 inches thick. There are five common styles of mantels that are popular to make.

How much should a mantel overhang?

A mantel should extend a minimum of 3 inches beyond the firebox opening. If the fireplace has facing around the opening, the mantel can also extend 3 or more inches beyond that.

How is a fireplace mantel attached?

As with many other forms of mantle or shelf, a fireplace mantel can be commonly attached to the wall with screws or lag bolts. Bolts are screwed into the wall above the fireplace before a mantel is slotted straight onto it. … In this case any screws or nails may be located on top or beneath the mantel.

What is a live edge shelf?

Live edge floating shelves are an interesting addition to any wall in any room. … Live edge refers to a piece of wood that still retains its natural shape from when it was cut from the tree. It might retain both cambium and bark. Place your live edge floating shelf anywhere you need a little decorative storage.

How do you support a corner shelf?

Corner shelving should be fixed to the support battens – with the shelf in position, mark underneath the side of the supports onto the shelf. Drill a hole halfway between the marks and the edge of the shelf to take a small screw, and countersink the top side of the shelf if necessary.

How do you hang a corner shelf without brackets?

Use a kit that is labeled to support more than the weight of the items you plan to place on it. You can also mount shelves using support pins or ledges. A support pin functions the same way as an invisible bracket in a floating shelf kit. It resembles a long rod with a flanged end, and fits into the shelf from behind.

What is a floating mantel?

Our mantels are hollow on the inside, providing an easy alternative to solid wood mantels. … Live grain end caps maintain the look of a solid piece of wood. Each mantel is hand crafted from reclaimed longleaf pine, providing a unique look and character that cannot be duplicated.

How do I attach a solid mantle to the wall?

Locate the studs behind the brick, stone, or faux veneer.
Drive 1/2in lag screws through each of the studs. …
Have a helper support the mantel while you mark the location of the support rods on the back of the beam. …
Apply construction adhesive into the holes. …
Slide into place, admire, and enjoy!

How do you attach a wood mantel to a brick fireplace?

Remove the old mantel.
Add support by drilling holes for lag shields, then install lag bolts into the brick.
Measure carefully and drill corresponding holes for the wood mantel.
Push the wooden mantel carefully into place using wood glue for extra support.

Article first time published on

How far should a mantel stick out?

A mantel should stick out at least 6 inches (15.24cm) from the wall. It’s the perfect depth that allows you to have a mantle effectively deflect heat without compromising aesthetics. You can extend it to have more depth for your decorative pieces, but we don’t recommend having it less than 6 inches (15.24cm).

What is code for a fireplace mantel?

The National Fire Code dictates that any combustible material (e.g., wood mantel or similar trim) must be at least six inches from the firebox opening. An additional inch of clearance is needed for every 1/8 inch the combustible material or trim protrudes.

How far from fireplace should mantle be?

Most housing codes and the National Fire Protection Agency (NFPA) state that the bottom of the mantel must be at least 12” away from the top of the fireplace box. The main factor for distance will come down to the Face Height of your mantel.

Should I remove bark from live edge?

For many live edge slabs, we must remove all the bark. It’s especially true if the wood comes from species, like hickory, that loses their bark despite the timing of its cut. … When we have all the bark removed, we’ll use a small nylon or wire brush to scrub away loose or stringy cambium-layer fibres.

How do you keep a live edge on wood?

Pour over epoxy resin is your best bet to hold the bark in place if you plan on keeping it. Polyurethane would be another option, but won’t be quite as strong. Oils and waxes seal the wood, but they aren’t going to serve as an adhesive like epoxy would to keep the bark in place.

How do you cut a live edge slab?

Place the log inside the frame and level it. Logs can be place parallel to the frame so they cut straight. …
Lower the blade to your desired height. …
Start the sawmill. …
Push the blade through the log. …
Repeat steps throughout the log.

Are Live Edge tables a fad?

Live edge furniture has become extremely desirable in recent years. It’s used for everything from coffee tables to large dining room tables and can be very costly. Some live edge tables can cost $6000+. When people are spending that much money on a table, they want to be sure it’ll be in style for years to come.

How do you secure a fireplace insert?

Put a Cover Plate on Your Chimney. It is recommended to put a cover plate on your chimney before installing an electric insert to prevent water from coming in. …
Close and Seal the Damper. …
Install a Power Outlet. …
Insert the Firebox into Your Fireplace. …
Attach The Trim or The Frame.

How do you seal a fireplace insert?

Adhesive Strips Available at many hardware and home improvement stores, small rolls of fiberglass-based stripping can be cut to size and applied in noticeable gaps between an insert and the masonry on the outside face of a fireplace, underneath the insert.