Hold the stapler securely in your left hand. Grasp it firmly with the top edge of the stapler resting in your palm. The stapling end will be pointed toward your left elbow. At the opposite end from the stapling end, you will see a metal piece that is curved on both sides.
Why is my stapler not working?
If unable to shake the jammed staple out, try to staple a single sheet of paper while the unit is jammed. This could possibly force the jam outward, clearing the unit. If this does not work, try using any sizable tool or nearby accessory, try to fish out the jammed staple through the “front teeth” of the stapler.
How do you open a stapler?
Open the stapler. To open these, grip the base of the stapler, then pull the top of the stapler until it lifts open and the staple tray is revealed. Back load staplers usually have a button on the back, so to open these, push the button until the stapler tray pops out slightly.
Why is my staple gun not firing?
When any important part is broken or worn out, the tool simply won’t work. … Make sure you are using staples of the correct size and type for the tool. Small variances can gum up the works and cause staples to jam or defeat the spring or hammer mechanisms.
What staples to use?
- Galvanized staples. A galvanized staple is the most common staple type. …
- Copper coated staples. Copper coated staples are one of the best choices when it comes to beautiful clean aesthetics. …
- Aluminum staples. …
- Stainless steel staples.
Why does my stapler keep jamming?
Originally Answered: Why do staplers jam? Cheap staples that are made of thin, softer wire and have blunt points are most likely to bend, crumple and fail to penetrate the layers of paper. Harder paper also resists the staple and causes crumpling.
How do you unjam a rapid Classic stapler?
- Firmly grab the handle of the heavy-duty stapler. …
- Pull out the remaining good staple clip and set it aside.
- Grab the jammed staple with the needle-nosed pliers and pull it out.
- Insert the solid clip of staples back into the head of the stapler.
What is the screw for on a staple gun?
The pressure screw (C) may be adjusted so that it will apply the appropriate force to the staple, or nail, depending upon the material being stapled. Note: The softer the material, the less force will be required to drive in the staple or nail. Excessive force may damage the material being stapled.
Why do my staples keep bending?
These are there because that base plate is reversible; you can rotate it to change which groove the staple wire hits when it comes through the stack of paper you are fastening together. … The setting most people use is the one that causes the legs of the staple to bend inward to hold a stack of papers firmly together.
