Press and hold the SET button for a few seconds until you hear two beeps and the LED indicator flashes red. This will put the lock in programming mode. Enter the default Programming Code (123456) and press the Lock button on the keypad. Enter 10 (1 and 0) and then press the Lock button.
How do I reprogram my electronic deadbolt?
- Remove the lock’s battery cover and then remove one battery.
- Press and hold the SET button. Next, insert the battery back while still holding the SET button. …
- Enter the default Master Code to complete the factory reset.
How do you reprogram a door keypad?
- Enter your 6-digit default programming code.
- Press the Schlage button and key 3. This will trigger three beeps and flashes.
- Now enter your new 6-digit programming code after the flashes and beeps.
- Wait to see if the light turns green. If it does, then your new code is successfully entered.
How do you reset a gatehouse deadbolt?
Press and hold the SET button(a little circle button on the inside of the interior assembly; see the image above). Keep holding the SET button. Next, put the battery back in and then release the SET button. The green LED indicator will illuminate, followed by two beeps and that shows the lock is reset.
How do I reset my IOT lock?
- Press the OrangeIOT button on your keypad twice and then enter your current Master Code. …
- Press 1 and enter your new Master Code (4 to 10 digits) and then press the OrangeIOT button.
Can you rekey Gatehouse locks?
Rekey Kit For 5-pin Gatehouse Door Locks You will be able to rekey up to 10 lock cylinders with a new key code. You will need your old key to assist you in the rekey process.
How do you unlock a gatehouse lock?
Locking from inside: Turn the interior thumb turn to a horizontal position to lock the door. Unlocking from outside: Enter an existing user code to unlock the door. Unlocking from inside: Turn the interior thumb turn to a vertical position to unlock the door.
How do I change my 4 digit Schlage deadbolt lock code?
Press the “Schlage” button and the number “1” button simultaneously to add/change a new entry code. Wait for the “Schlage” button to beep and flash three times. Enter a new four-digit code, and wait for the “Schlage” button to flash and beep three times. Re-enter the same four-digit code to confirm the change.
Where is Schlage program code?
The default programming code is printed on a label on the programming guide that came with your lock. If you do not have access to the guide, remove the lock from the door and look on the back of the lock for a label containing the default code.
How do I change the master code on my IOT range?
SettingsFactory DefaultMaster Code12345678Auto-LockDisabledSilent ModeDisabledWrong Code Entry Limit10 times
Article first time published on
What is the master code for Kwikset lock?
The default Mastercode is 0-0-0-0. It is recommended that you change it to a code of your own. 1. Make sure the lock is unlocked and the door is open.
What is the program button on Kwikset lock?
For most Kwikset smart locks, the program button is on the inside of the interior assembly. You may need to remove the interior cover to access the program button.
How do you reset a 4 digit combination lock box?
- Open the lock using the previous combination. …
- Insert the reset tool in the hole on the side of the lock. …
- Push the reset tool in and turn 90° in either direction. …
- Set wheels to your new combination.
- Turn and remove the reset tool. …
- Record your combination in a safe place.
How many combinations does a 4 digit lock have?
There are 10,000 possible combinations that the digits 0-9 can be arranged into to form a four-digit code.
Is Gatehouse a good lock?
Conclusion on Gatehouse Lock As you can see Gatehouse offers a lot more products than just locks. However, their deadbolts are a great alternative to more expensive brands offered by the big names in the market. If you want a quality product at a more affordable price, this is a brand that you want to look at.
