Step 1: Prep for Fireplace Restoration. … Step 2: Repair Veneer (Optional) … Step 3: Remove Old Finish. … Step 4: Prep Mantel Surface for Finishing. … Step 5: Refinish Mantel. … Step 6: Clean Up. … Step 1: Prep for Fireplace Restoration. … Step 2: Repair Veneer (Optional)
How do you refinish a wooden fireplace mantel?
Sand the entire mantel with medium-grit sandpaper followed by fine-grit paper until it is smooth and free of imperfections. Sand with the grain of the wood. Fill cracks and holes with wood filler that matches the color of your stain. Wipe the surface clean with a tack cloth.
What kind of stain do you use on a fireplace mantel?
Protect your fireplace mantel stain with a coat of polyurethane. The heat generated by a fireplace makes a protective sealant even more important. Apply two coats of polyurethane or tung oil to the mantel in the same direction as the grain of the wood. Allow it to dry overnight.
Do I need to sand mantle before painting?
Preparing A Fireplace Mantel for Paint. … The only prep work needed is surface cleaning, a good scuff sanding, and your paint. Unpainted mantels take more time to paint. These are typically finished with stain and varnish, and paint alone won’t stick to the surface good without sanding and priming.
How do you modernize a fireplace mantel?
- FIREPLACE UPDATE IDEA: Paint the brass surround. …
- FIREPLACE UPDATE IDEA: Retile with peel & stick tiles. …
- FIREPLACE UPDATE IDEA: Paint the mantel & fireplace surround. …
- FIREPLACE UPDATE IDEA: Seal your stone, brick or hearth.
Can you stain a wooden fireplace?
Oil stain is the best choice for oak fireplaces. Oil stain penetrates deep to bring out grain lines in oak. It requires drying times of up to 72 hours, but it’s worth it. Oil stain also provides suppleness to older wood, deep-feeding it to prevent cracks and splits.
How do you treat wood mantel?
You should re-oil surrounds every year using a good quality Oil and apply with a clean cloth and work the oil into the surface of the Wooden surround remove any excess after 10 minutes and then let the oil soak into the timber once its dried that’s all that has to be done and its ready to be refitted.
How do you make a fireplace makeover?
- Add Glass Fireplace Doors. A cozy fire on a cold night is a delight. …
- Get Your Firebrick in Shape. …
- Install a Mantel. …
- Opt for a Salvaged Mantel. …
- Add a Gas Fireplace. …
- Put in a Fireplace Insert. …
- Tile a Hearth. …
- Choose the Right Tiles.
How do you make an old fireplace look modern?
- Start by giving it a good clean. …
- Brush it up with paint. …
- Embrace the materials. …
- Whitewash it. …
- Tile in style. …
- Fit a floating beam. …
- Replace the mantelpiece. …
- Try a faux fire.
Is painting a fireplace a good idea?
PROS: An exceptionally talented painter can make an old brick wall or fireplace look more modern and in some interior spaces, painting dark bricks will brighten things up. … Overall, painting an interior brick surface is less costly than an exterior brick surface.
Article first time published on
Can I paint my fireplace surround?
For painting a fireplace surround, select a paint that’s rated to withstand high temperatures. … For your paint, the general rule for fireplace surrounds is an indoor, latex, and heat resistant paint. You can select either flat, semi-gloss or gloss, depending on what look you want your fireplace surround to have.
What is Danish oil?
Danish oil is typically made from blends of Linseed oil and/or Tung oil, mineral spirits, synthetic resins and varnish to make it durable and easy to work with. Rustins Danish oil however is considered to be the ‘original’ formula.
How do you stain a rough cedar mantel?
Apply a layer of oil based stain using a rag or sponge. Wipe the excess of with a clean rag. Add a second layer if you want a deeper color. Allow the recommended label drying time before continuing.
Can you use Danish oil on oak?
Danish Oil is completely non-toxic and food safe when dry which means in can be used on all oak items and in all environments.
How do you update an old fireplace on a budget?
- Add a touch of paint. Gone are the days of design elements such as bold and bright red fireplaces and natural, oak-colored wall paneling and trim. …
- Turn your brick to stone. …
- Add a mantel. …
- Think — and build — outside the box. …
- Accessorize, accessorize, accessorize.
Do you have to sand unfinished wood before staining?
Preparing The Surface All the furniture from Unfinished Furniture Expo is pre-sanded from the factory, but light sanding is still recommended for a smooth stain application before you use a wood finishing product. Always sand in the direction of the grain.
How do you varnish unfinished wood?
Apply an even coat of oil-based or water-based polyurethane or spar varnish to the sanded wood with a natural-bristle brush. Allow the varnish to dry for at least 12 hours. Clean your brush with mineral spirits for oil-based finishes or a soap and water solution for water-based varnish.
Should I polyurethane my mantel?
Wood Mantel Prime the wood with either a clear or white primer. … Seal whichever sealer you use with a coat of Minwax Polyurethane to ensure the mantel is protected. Always double-check with the manufacturer, whether in the directions, on the can or by phone, to ensure that the product is safe to use on mantels.
Can you put polyurethane on a fireplace mantel?
Three coats of polyurethane should be adequate for your mantel because this surface is not likely to receive a great deal of wear. If a thicker coat is desired, apply a fourth coat of polyurethane to the wood.
Is Minwax fast drying polyurethane waterproof?
Yes, polyurethane provides a protective layer on hardwood (as well as furniture) making it harder for water to penetrate into the wood. But, it is not waterproof; rather, it’s water resistant.
What is Ishearth?
A hearth /hɑːrθ/ is the place in a home where a fire is or was traditionally kept for home heating and for cooking, usually constituted by at least a horizontal hearthstone and often enclosed to varying degrees by any combination of reredos, fireplace, oven, smoke hood, or chimney.
How easy is it to change a fireplace surround?
The fire surround is often the easiest place to start, as you don’t need to worry about gas pipes or brickwork. Here, some paint, new accessories or even a whole new surround can go a long way when you need an easy fireplace update.
Can I paint my fireplace?
Choose indoor, latex, heat-resistant paint (either flat, semigloss, or gloss) that’s rated to withstand temperatures generated by the fireplace (generally about 200°F). Remember that this type of paint is only appropriate for the exterior of a brick fireplace, not the interior firebox.
Why you shouldn't paint your fireplace?
The temperature inside your chimney is different than the temperature outside your chimney. This creates moisture buildup, like steam from a hot shower. The moisture goes into the bricks and escapes through the pores. If you have paint on the bricks, the moisture has nowhere to go.
What color should my mantle be?
The general rule of thumb is for a fireplace mantel to be a neutral color. This ensures the mantel will blend with the room even if the colors are changed. Likewise, it keeps the mantel from standing out too much. If you want to paint your mantel, white and off white colors like ivory are generally a good choice.
What color should I paint the inside of my fireplace?
Basic flat black fireplace paint is a good choice; it’s a neutral color and can hide soot easily. Black also tends to look nice with almost any fireplace and room decor. Beige, off-white, or almond create a fresh, bright look.
