How much does a Farmall Super A weight

Dimensions & TiresWheelbase:71.1 inches 180 cmWeight:2,400 lbs 1088 kgFront tire:5.00-15Rear tire:9-24

What is the difference between a Farmall A and Super A?

The noticeable difference between the Super A and A-1 is the distance between the fuel tank and the hydrualic reservoir… the Super A has about a 3/4″ space between the two, while the A-1 has about a 2″ space.

How many horsepower is a Farmall A?

The Farmall “A” and “AV” were small, “one-plow” tractors that delivered 16.3 horsepower on the drawbar and 18.3 on the belt. They were offered with either a gasoline or distillate four-cylinder engine. The “A” had 21 inches of clearance and the “AV” had almost 28 inches.

How heavy is a Farmall A tractor?

Farmall AWidth55.8 inches (142 cm)Height64.25 inches (163.2 cm) (to wheel)Weight3,570 pounds (1,620 kg)PropulsionRear wheels

What is the rarest Farmall tractor?

The International, or standard version production totaled only 158. These totals are quite low compared to other tractor models built by International Harvester, and today the Farmall 1026 could be considered a rare tractor, and the International 1026 extremely rare.

What years did they make the Farmall Super A?

The Farmall Super A was built by International Harvester from 1947 to 1954 in Chicago, Illinois and Louisville, Kentucky, USA.

Does a Farmall Super A have a water pump?

…following without a factory water pump: A-I International / Farmall – Fits: Fits the following without a factory water pump: A, A1, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1; Replaces: 354474R95 * For engines with 3″ – 3-3/8″ bore* Head gasket has larger water jacket holes than IHS840…

What is the weight of a Farmall Cub?

Farmall CubTransmission3 – Speed ManualDimensionsWheelbase69.25 In (1,758.95 mm)Curb weight1,477 – 1,877 lb (670 – 851.39 kg)

How much does a 1941 Farmall A weigh?

1941 Farmall HWidth75.7 inches (192 cm)Height74 inches (190 cm) to steering wheel)Weight2,845 pounds (1,290 kg)PropulsionRear wheels

Who bought out Farmall?

IndustryAgricultural, AutomotiveFateRenamed as Navistar International CorporationSuccessorNavistar InternationalHeadquartersChicago, Illinois, U.S.Area servedWorldwide

Article first time published on

What was the last Farmall tractor made?

The last tractor made at Farmall was an all-wheel drive model 5488, now on display in the Innovation Gallery in the CNH (Case New Holland) headquarters in Burr Ridge, Ill.

What was the first Farmall tractor ever made?

When the 1940s began, International Harverster’s Farmall was the most popular tractor brand in the U.S. But during the decade their market share was challenged. The innovative Farmall tractor was first introduced in 1923 and was the first “row crop” tractor.

How many Farmall Super MTA were built?

The Farmall Super M has five forward gears and one reverse gear. There were about 44,551 Super Ms produced, 5,199 Super MDs produced and about 26,924 Super MTAs produced.

What is a Waterloo Boy tractor?

The Waterloo Boy was the last tractor produced by Deere and Company before adopting the John Deere brand with the Model D. This 1918 Waterloo Boy draws 25 horsepower from its two-cylinder engine. The engine ran on kerosene, a fuel that farmers could acquire more easily and less expensively than gasoline.

What is a Farmall Super MD?

The Farmall M was the next step up in size from the Farmall H and the biggest of the line from 1939 until the introduction of the Farmall number-series tractors in mid-1954. … With a 263.9-cu.in. gasoline engine, the Super M, introduced in 1952, was rated at 44hp and 360-lbs.

Where were Farmall A made?

The new Farmall A tractors are now being manufactured in the state-of-the-art CNH factory facility in Queretaro, Mexico, with a capacity of over 8,000 units per year.

How many Farmall B's were made?

ProductionManufacturer:Farmall (a part of International Harvester)Factories:Chicago, Illinois, USALouisville, Kentucky, USATotal built:75,241

How much does a 8n Ford tractor weigh?

Ford N-series tractorLength115 in (2,921 mm)Width64.75 in (1,645 mm)Curb weight2,410 lb (1,093 kg)Chronology

How much does an International Cub Cadet weigh?

Dimensions & TiresWheelbase43 inches 109 cmWeight605 lbs 274 kgFront tire4.80×4.00-8Rear tire6-12

How big is a Farmall Cub?

DimensionsWheelbase:69.25 inches 175 cmLength:99.325 inches 252 cmWidth:48.25 inches 122 cmHeight:62.75 inches 159 cm

What does 8N mean on a tractor?

The 8N introduced position control, which is a small up/down handle under the seat on the right side–this was an improvement to the hydraulic system. Both brake pedals are on the same side – 9N and 2N tractors were split.

Does a Farmall C have hydraulics?

With a rear linkage capacity of 3,700kg and separate hydraulic circuits for steering and external services, the Farmall C is never short on ability. … The Farmall C comes ready for perfect front loader operation.

What killed Farmall?

On May 23, 2003, a 13-year-old farm youth was killed when he became entangled in an unguarded rotating power take-off (PTO) shaft at the rear of his narrow front Farmall Model M tractor.

What happened to Farmall tractors?

During the 1940s and 1950s, the brand was ubiquitous in North American farming. Various trends in farming after the 1960s—such as the decline of cultivating in favor of herbicidal weed control, and the consolidation of the agricultural sector into larger but fewer farms—ended the era of Farmall manufacturing.

How much does a 560 International tractor weigh?

Dimensions & TiresWheelbase:85.5 inches 217 cmWeight:6563 to 6785 poundsFront tire:6.50-18Rear tire:16.9/14-30

Why did International Harvester go out of business?

The final loss of IH independence in 1984 came after a long period of profit margins below those of its competitors. Traditionally, IH farm equipment had been the largest product line, even though the truck division had grown rapidly. The construction equipment division had been expanded through acquisitions.

What is the difference between Farmall and International?

The Farmall was a row-crop tractor, capable of cultivating in between the rows of growing crops. … Industrial tractors were labeled “International,” although some early models may have the McCormick-Deering nameplate.

How much is a Farmall H worth?

First things first: this really is an incredible selling price for a Farmall H! There are plenty of Farmall H tractors still around – hundreds of thousands were produced, and here in Michigan you can usually by a Farmall H for as little as $1,000.

Who makes McCormick?

McCormick is a subsidiary of ARGO SpA. In December 2006, ARGO SpA announced that the Doncaster facility was to close with the loss of around 325 jobs.

What replaced the Farmall M?

The British model was produced from 1948 to 1953 in Doncaster, and the Australian model from 1949 to 1954 in Geelong. The M line was replaced by the Farmall 400.