A 60-inch round table probably works best in an open or square dining space so that no one is too crowded on one side or the other. … And don’t worry if you have a couple extra unexpected dinner guests; a 60-inch round table can easily accommodate 6 people and as many as 8 or 9 people as well.
How big of a round table do you need for 6 chairs?
You will need at least 48 to 60 inches in diameter (4–5ft; 122–152cm) to seat six at a round table, working best with a pedestal base. It is possible to create a tight 6-seater round dining table with a diameter of 44–54 inches, but aiming for 54–60 inches is a more comfortable fit and may even squeeze in eight.
How big is a 60 inch round table?
Table SizeNumber of PeopleAverage Price8 Foot Rectangle Table (96″x30″)8-10$8.0036 Inch (3 foot) Round Table4$8.0048 Inch (4 foot) Round Table6-8$8.0060 Inch (5 foot) Round Table8-10$8.00
How much room do you need for a 60 inch round table and chairs?
Use 12 sq ft per person for 60 in round tables with 8 per table or any other round table.
How many chairs fit at a 6ft table?
How Many People Can Sit at a 6 Foot Table? If you have a 6 foot round table (72 inches), you can seat 8-10 people at the table. If it is a 30 inch by 72 inch rectangular table, 6-8 seats will fit around the table, with 3 chairs on either side and 1 chair at either end.
What size tablecloth fits a 60 inch round table?
For a round table, measure the diameter of your table and add twice the desired drop. For example a 60-inch round table with a 15-inch drop would require a 90-inch round tablecloth.
How many chairs can you fit around a 54 inch round table?
54″ Round Dining Table. For a formal meal, a 54″ round table will seat 5 people comfortably. For a casual meal, you can sit 6 people around the table.
How much space do you need around a round dining table?
The general rule of thumb is to allow 24 inches of space for every person gathered around your table. Most side chairs range between 16” wide and 24” wide, with arm chairs being as wide as 30”.
How much space do you need around a round table?
For banquet style setup using large round tables you should leave a space of 60″ minimum. This is 2 x 18″ for the seats, and 24″ room in between the chairs. The picture to the right illustrates this.
How much space does a 72 round table with chairs require?
So let’s break this down into inches. The circumference of a 72-inch table is about 226 inches. In general, to sit comfortably most people need about 24 inches of table space.
Article first time published on
How many does a 60 rectangle table seat?
A 54” long rectangular table can seat up to 4 adults. A 60” to 72” long rectangular table can seat up to 6 adults. An 84” to 96” long rectangular table can seat up to 8 adults.
How many round tables do you need for 50 guests?
The math is pretty simple here if you want to just go with the blind rule of 1 table per 10 guests. That’s 5 cocktail tables for 50 guests and 6 tables for 60 guests.
How many chairs fit around an 80 inch table?
Tables that measure 80 inches and under are best for comfortably seating up to six people.
What size table cloth do I need for a 6 ft table?
Example: 6′ foot (72″ length x 30″ height and width) rectangular table would require a 90″x132″ tablecloth.
How many chairs fit around a 120cm round table?
120-centimetre diameter with legs seats four. 150-centimetre diameter with a pedestal base seats six. 150-centimetre diameter with legs seats four. 180-centimetre diameter with pedestal base or legs seats eight.
Does a round table take up more space?
If you have a small house or dining room, bear in mind that round tables take up less space. They have a smaller surface area than their rectangular counterparts so will fit into tighter spaces much more easily.
What size linen goes on a 60 round?
For a 60″ round table, I recommend a 120″ round linen so that it touches the floor and hides the table legs. For floor length on the 5 foot (60 inches) in diameter round table, you need a 120″ round tablecloth.
How many inches should a tablecloth hang over?
For most purposes, an overhang or “drop length” of at least 6 inches (15cm) is appropriate. A shorter drop length may make the tablecloth look too small for the table. For more formal occasions or tables that do not have chairs stored under them, you may choose to have a drop length extending all the way to the ground.
How do you measure a round table?
Diameter – On circular tables, the diameter is the length across the top from side to side, through the center. An easy way to find it is to hold the end of a measuring tape and one spot, extend it to the other side, and then slowly move the extended end back and forth until you find the longest point.
How much space should be between chairs?
Allow at least 24″ between chairs, as measured from the center point of the seat. For example, if each seat is 18″ wide, a minimum of 6 inches between chairs will provide sufficient elbow room. Wall Space: 30” from the back of the chair to the wall.
How much space do you need to pull out a chair?
Avoid banged up walls and keep diners comfortable by leaving at least two feet between a dining chair and a wall. That will allow enough room to walk behind and pull out the chair. Chairs should be spaced about two feet apart. When space allows, place the dining table about four feet from the room’s entrance.
Can you put a round table in a rectangular room?
The Shape Factor Square pegs don’t fit round holes. Similarly, round dining tables won’t look good in a rectangular room! … The best match for a round dining table is a square-shaped space. Don’t worry, the area doesn’t have to be a perfect square, it simply needs to have a length and breadth that are somewhat similar.
How many inches should be between dining chairs?
Allow at least 24 inches between chairs, as measured from the center point of the seat. For example, if each seat is 18 inches wide, a minimum of 6 inches between chairs will provide sufficient elbow room.
Do dining chairs have to fit under table?
RULE: Chairs should be able to slide under the table with ease with or without arms. Ideally, there should be 7″ between the chair arm and apron of the table but that’s not a hard rule. … The back height of your chair should be similar in scale to your table.
What is the length of a 10 seater dining table?
Size of Dining TableLengthWidth4 seater dining table75cm – 90cm75cm – 90cm6 seater dining table118cm – 140cm75cm – 90cm8 seater dining table150cm – 220cm75cm – 90cm10 seater dining table180cm – 280cm90cm – 100cm
How big should a room be for a 72 inch round table?
Using this guideline, a dining room 10-by-12-feet long accommodates a table 36 to 42 inches wide and 60 to 72 inches long.
How many does a 72 inch table seat?
A good starting size for a rectangular table is 60″ x 30″, with that size, you can accommodate 6 guests comfortably, and a few more in a pinch. Stretching the length to 72″ will allow you to comfortably seat 8 people, and increasing the size to 72″ x 48″ will allow you to comfortably seat 10.
How long is a table that seats 6?
For Rectangular Tables: Most people find that a 6 foot long (72 inch) dining table is perfect for seating 6 comfortably.
How do you seat a large group for dinner?
Push the living room furniture against the walls and amass a few card tables together to make a large dining table. Or set up card tables restaurant-style to accommodate four guests apiece, but all in the same space. Clear the tables for dessert and have everyone change tables to sit with different guests.
How wide is a 6ft banquet table?
For example a standard 6 foot banquet table is 72 inches x 30 inches with a 30 inch drop to the floor. For this example you will need 72 inches of fabric for the table top plus your desired drop. A standard banquet linen for a 6 foot table is 96 inches long x 60 inches wide (8 foot banquet linen).
