What is revolved base SolidWorks

Revolves add or remove material by revolving one or more profiles around a centerline. You can create revolved boss/bases, revolved cuts, or revolved surfaces. To create a revolve feature, use the following guidelines: … The sketch for a solid revolved feature can contain multiple intersecting profiles.

What does revolved boss base do in SolidWorks?

Revolved Boss or Base is a SolidWorks feature tool which is used to create solid 3D model around an axis. You can revolve the sketch around an axis to add materials to it.

How do you revolve boss bases in Solidworks?

Create a sketch that contains one or more profiles and a centerline, line, or edge to use as the axis around which the feature revolves. Click one of the following revolve tools: Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.

How do you use revolve Extrude in SolidWorks?

Open a sketch on a face or plane, and sketch a profile of the cut. …
Click Extruded Cut or Revolved Cut (Features toolbar), or click Insert > Assembly Feature > Cut , then Extrude or Revolve.
Set the options as needed in the Extrude or Revolve PropertyManager.

How do you sweep cut in Solidworks?

Open a part that has either a closed profile sketch and a sketch path, or a part with a sketch line, edge or curve on the model that you can specify as a path. For a solid profile, open a part that has a tool body as the profile and a sketch path to follow.
Click Swept Cut (Features toolbar).

What is loft in Solidworks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. For a solid loft, the first and last profiles must be model faces or faces created by split lines, planar profiles, or surfaces. …

How do you do a revolve?

Select a sketch.
Click Revolve from the mini toolbar or the Shapes group.
Select an axis for the revolve.
Select Solid from the dashboard.
Specify to revolve from a sketch plane by a specified angle value.
Edit the angle to 180.
Click Flip Direction.
Click Thicken Sketch.

How do you break out a section in Solidworks?

In a section view, click Insert > Drawing View > Broken-out Section.
Sketch a closed profile such as a spline.
In the PropertyManager, set options.
Click .

What is extruded boss in Solidworks?

Oysu. Chapter 3 Extruded Boss and Cut. Extrude tool is used to extend a sketched profile in one or two directions as either a thin feature or a solid feature. An extrude operation can either add material to a part (in a base or boss) or remove material from a part. 3.1 Extruded Boss.

What is sweep in Solidworks?

A frequently asked question amongst clients is, “What is a sweep?” Within SOLIDWORKS, a sweep is a tool that creates a solid, a cut or a surface feature by moving a profile along a path. To create a solid, use the Swept Boss tool to move a profile along a path. The profile can contain one or more closed contours.

Article first time published on

How do you move a cut Extrude in Solidworks?

Select the Insert Tab.
Select Features.
Select Move/Copy Bodies.
Select the body you want to move.
Select translate, rotate or contraints.
If selection is translate, then select the X, Y and Z direction distance.
If selection is rotate, then select the X, Y and Z axis Degree of rotation.

What is a revolved extrusion?

Revolved Extrusion command. Adds or removes material from a part by revolving sketch elements (A) around a user-defined axis of rotation (B). You define whether material is added or removed by cursor position while constructing the feature, or by setting options on command bar or by using short-cut keys.

How do I use the shell tool in Solidworks?

Step 1: Create New Part File. Open Solidworks CAD software and create new part file. …
Step 2: Create Rectangle Box. …
Step 3: Select SolidWorks Shell Tool. …
Step 4: Apply Solidworks Shell Tool.

How do I use the sweep tool in Solidworks?

Swept Boss/Base on the Features toolbar or Insert > Boss/Base > Sweep.
Swept Cut on the Features toolbar or Insert > Cut > Sweep.
Swept Surface on the Surfaces toolbar or Insert > Surface > Sweep.

Why is swept cut greyed out?

RE: swept boss option greyed out You need to be editing a new part in the context of the assembly. There are only a few features you can add at an assembly level and most of them are cuts or welds.

What is boundary cut in Solidworks?

SolidWorks boundary cut is a cut feature tool which helps to cut a solid model by removing material between profiles in two directions. … Solidworks boundary cut applications are creating different cross-section curved holes, mold design, complex shape face material removal etc.

Where is revolve in Solidworks?

Revolved Boss/Base (Features toolbar) or Insert > Boss/Base > Revolve. Revolved Cut (Features toolbar) or Insert > Cut > Revolve.

What is revolve function?

Creates a 3D solid or surface by sweeping an object around an axis. Find. Open profiles create surfaces and closed profiles can create either a solid or a surface. The MOde option controls is a solid of surface is created.

How do you make a lofted base in SolidWorks?

Do one of the following: Click Lofted Boss/Base (Features toolbar) or Insert > Boss/Base > Loft. Click Lofted Cut (Features toolbar) or Cut > Loft > Insert. Click Lofted Surface (Surfaces toolbar) or Insert > Surface > Loft.
Set the options in the PropertyManager.
Click .

How do you make a lofted boss base in SolidWorks?

Sketch your profiles. A minimum of two are required but a higher number of profiles allows you to create more complex shapes. …
Select the Loft Feature, then choose the profiles in order. …
Adjust the Constraints and options as required.

How do you fill a lofted surface in SolidWorks?

To create a filled surface, click Filled Surface on the Surfaces toolbar, or click Insert > Surface > Fill, set the PropertyManager options, and click OK .

What does thin feature do in Solidworks?

The thin feature allows you to cut in one direction, from the midplane, or in two separate directions. Cutting in one direction allows you to cut to either side of the sketch at a determined distance. Cutting from the midplane will allow the cut to be spaced equally on both sides of the sketch.

What is fillet in Solidworks?

Fillet/Round creates a rounded internal or external face on the part. You can fillet all edges of a face, selected sets of faces, selected edges, or edge loops. Creating Fillets. Fillet PropertyManager. Use the Fillet PropertyManager to control options for fillet features.

What is blind in Solidworks?

The default end condition is “blind,” which means we will take our sketch and extrude it a set distance from the sketch plane. After that distance is met, extrusion will stop. So the condition for ending the extrusion is that it will proceed a set distance and then stop. Again, this is known as a “blind” end condition.

How do I view sections in Solidworks?

In a part or assembly document, click Section View. (View toolbar) or View > Display > Section View.
In the Section View PropertyManager, under Section 1, set the properties.
To section the model with additional planes or faces, select Section 2 and Section 3 and set the properties. …
Click .

What are the 7 types of section views?

There are a number of different types of sectional views that can be drawn. A few of the more common ones are: full sections, half sections, broken sections, rotated or revolved sections, removed sections, offset sections, and assembly sections.

How do I align a section line in Solidworks?

You can pre-select sketch entities that belong to the drawing sheet to create aligned section views. The sketch entities do not have to belong to an existing drawing view. To create an aligned section view: Click Aligned Section View on the Drawing toolbar, or click Insert, Drawing View, Aligned Section.

What is lofted boss base in Solidworks?

Loft creates a feature by making transitions between profiles. A loft can be a base, boss, cut, or surface. You create a loft using two or more profiles. Only the first, last, or first and last profiles can be points.

What are the different mates in Solidworks?

Standard mates include angle, coincident, concentric, distance, lock, parallel, perpendicular, and tangent mates. Advanced mates include limit, linear/linear coupler, path, profile center, symmetry, and width mates.