What is the difference between aw and iso hydraulic fluid

AW stands for anti-wear – R&O oils with an anti-wear additive package. The ISO classification for these oils is HM. MV stands for multi-viscosity. … The ISO classification is HR for VI-improved R&O oils and HV for VI-improved AW oils.

Can you mix ISO and AW hydraulic oil?

Mixing oils with different additive packages is never recommended. Doing so could compromise the additive performance of both constituents, cause corrosion of component surfaces and lead to increased mechanical wear.

Is AW 32 the same as ISO 32 hydraulic oil?

AW 32 hydraulic fluids have an International Standards Viscosity Grade or ISO VG of 32. This is the thickness of the fluid tested at 40 degrees Celcius. ISO VG 32 has good cold weather flow capabilities and its thickness is equivalent to a SAE 10 weight lubricant.

Is ISO 46 the same as AW 46 hydraulic oil?

The vicosity is simply referred to by ISO 46. AW stands for Anti Wear. AW 46 is the same as AW 46. The words are rearranged in different ways.

Is ISO 46 the same as AW 32?

For instance, you may see AW 46 hydraulic oil while looking around. These oils perform at the same grade as their ISO counterparts. An AW 32 hydraulic oil is going to be at 32cSt at 40°C for instance. The difference here is that there are additives contained within the oil.

What is the difference between AW32 and AW 46 hydraulic oil?

AW32 is approximately a 10 weight oil with the additives. AW46 is approximately a 15 weight oil with the additives. AW provides many of the advantages of premium hydraulic oil at a moderate price. Suitable for use in applications where a Premium AW product is not required.

What is the difference between AW 46 and AW 68 hydraulic oil?

AW32 is approximately a 10 weight oil with the additives ▪ AW46 is approximately a 15 weight oil with the additives ▪ AW68 is approximately a 20 weight oil with the additives AW –provides many of the advantages of premium hydraulic oil at a moderate price.

Can you mix ISO 32 and ISO 46 hydraulic oil?

Is AW and ISO the same?

What does ISO mean in hydraulic oil?

ISO VG stands for “International Standards Organization Viscosity Grade” and is reported in numbers ranging from 2 all the way up to 1500. This number is critical because a lubricant’s viscosity is the single most important factor when selecting the right oil for your machinery.

Article first time published on

What is AW ISO 32 hydraulic oil used for?

ISO 32, 46 and 68 grades are most commonly used for hydraulics with vane-, piston-, or gear-type pumps, especially where pressures exceed 1000 psi. They can also be used to lubricate lightly loaded reciprocating compressors.

What does AW 32 mean in hydraulic oil?

Quite simply, AW stands for”anti-wear” and the ISO classification for AW oils is —HM. … For example, AW 46 hydraulic oil is used to operate the hydraulic systems in off road equipment such as dump trucks, excavators, and backhoes, while AW 32 hydraulic oil colder weather application, like in a snow plow’s pump.

What is AW ISO 32?

AW Hydraulic Oil (ISO: 32, 46, 68, 100) AW Hydraulic Oil is premium grade oil designed for use in all hydraulic systems where anti-wear hydraulic oil is recommended. All grades are rust and oxidation inhibited and contain an effective anti-wear additive and anti-foam additives to release entrained air rapidly.

Is AW 32 the same as 10W?

SAE 10W is equivalent to ISO 32, SAE 20 is equivalent to ISO 46 and 68, and SAE 30 is equivalent to ISO 100. As you can see, there is a bit of a difference between ISO 68 and SAE 30. The viscosity of the fluid largely determines the oil temperatures within which the hydraulic system can safely operate.

What kind of hydraulic oil do you use in a excavator?

Midlands Lubricants Hydraulic VG 46 oil is blended to ISO 46 viscosity grade requirements and is recommended as suitable for use in a wide range of mobile or static equipment that have hydraulic applications including Forklift Hydraulic Oil, Dumper Hydraulic Oil, Digger Hydraulic Oil and Loader Hydraulic Oil etc.

What is 10W AW hydraulic fluid?

Mobil Hydraulic 10W is a high performance hydraulic oil formulated from advanced base oils and a balanced additive system designed to satisfy a wide range of heavy-duty hydraulic equipment requirements.

Is ISO 68 the same as AW 68?

AW 68 hydraulic fluids have an International Standards Viscosity Grade or ISO VG of 68. This is the thickness of the fluid tested at 40 degrees Celsius. ISO VG 68 is on the heavier side for a hydraulic fluid which flows equivalent to a SAE 20 weight lubricant.

What weight is AW 100 hydraulic?

AW 100 hydraulic fluids have an International Standards Viscosity Grade or ISO VG of 100. This is the thickness of the fluid tested at 40 degrees Celsius. ISO VG 100 would be considered thick for a hydraulic and flows equivalent to a SAE 30 weight lubricant.

What color is AW 32 hydraulic fluid?

SKUCLAR32Pour Point, °C(°F)-33C (-27F)Flash Point222C (432F)Specific GravityAPI 32.8ColorOther

Is hydraulic oil better 32 or 46?

32 is thinner, No. 46 is medium and No. 68 is thicker. Generally speaking, if the temperature is low in winter, use #32 & #46 hydraulic oil with a lower viscosity, and use #68 hydraulic oil with a higher viscosity in summer.

Is AW 46 thicker than aw32?

AW-32 is neither “better nor worse” than AW-46. The numbers refer only to the viscosity, not to the quality. Quality of the oil is determined by the manufacturer. For Atlas above ground lifts, AW-32 (lower number than AW-46) will flow “better” in colder weather than AW-46.

What weight oil is AW 46?

AW 46 hydraulic fluids have an International Standards Viscosity Grade or ISO VG of 46. This is the thickness of the fluid tested at 40 degrees Celsius. ISO VG 46 is the most popular grade due to its middle grade flow properties with a thickness that is equivalent to a SAE 15 weight lubricant.

What is AW 22 hydraulic oil?

AW 22 Hydraulic Oils contain a zinc anti-wear additive that is designed to protect hydraulic systems and equipment by reducing wear. The quality of the base oil controls corrosion, oxidation, and suppresses foam and aeration. AW 22 hydraulic fluids have an International Standards Viscosity Grade or ISO VG of 22.

What is the viscosity of AW 68 hydraulic oil?

SKUCLAR68BrandClarityViscosityISO 68Viscosity Index102Kinematic Viscosity cSt 40°C64.6

What viscosity is AW 32 hydraulic oil?

Flash Point, PMCC400°F (204°C)Pour Point-31°F (-35°C)Rust Protection, ASTM 665B A&BPassSpecific Gravity0.875Viscosity (40°C)32 cSt @ 40°C

How do I choose a hydraulic oil?

Select the right viscosity at the given operating temperatures to ensure the highest efficiency and to meet the system requirements.
Select the suitable AW additives: Zn or Zn free anti-wear protection additives.
Check on viscosity index.

Is AW 32 non conductive?

The High Viscosity Index (HVI) products are for wide temperature application and have a typical dielectric strength of 35kV which makes them suitable for use as non conductive hydraulic fluids. HVI-32 and HVI-46 meet FMC Corporation recommendations for a high viscosity index hydraulic fluid.

What is AW 46 hydraulic oil?

Valvoline™ AW 46 Synthetic Hydraulic Oil. A top-tier oil formulated with premium synthetic base oils and additives for use in a wide variety of hydraulic systems. It is a zinc-based, non-detergent oil with excellent oxidation and demulsibility characteristics and contains rust and foam inhibitors.

What color is AW 46 hydraulic oil?

MAJOR BRANDS AW46 HYDRAULIC FLUID RED-5G. General purpose hydraulic fluids formulated with refined paraffinic base oils to provide excellent anti-wear protection, oxidation and corrosion inhibition, as well as foam and aeration suppression.

What is the viscosity of AW 46 hydraulic oil?

Manufacturers generally measure viscosity in centistokes (cSt). At 40 degrees Celsius, AW 46’s viscosity is 46 cSt, giving it its name. At 100 degrees Celsius, its viscosity thins out to 6.8 cSt.