2 x 6 boards available in 12′, 16′, and 20′ lengths.
What size is composite decking?
The length of composite decking boards comes in 6′, 12′, 16′ and up to 20′. The width of the composite board also varies and can range from 1 to 2 inches thick and 4 to 6 inches wide.
What widths do decking boards come in?
Common deck board widths are 4”, 6” and 8”. The widths are readily available in most lumber or building supply stores, and the number of pieces easily calculated into deck dimensions. Other widths may be used for aesthetics and effect.
Are Trex boards exactly 16 feet?
Trex Enhance Basics 16-ft Clam Shell Grooved Composite Deck Board.
How many Trex boards do I need for a 12x12 deck?
Board lengthBoards required8 FT20612 FT13716 FT10320 FT83
Does Trex decking come in different widths?
The actual Trex decking boards are available in 1 or 2 inch thick boards. … The Square Edge Board is available in 1 or 2 inch widths and 12, 16 or 20 foot lengths. The boards are either 3.5 inches or 5.5 inches wide.
What is the difference between Trex Select and transcend?
The surface of Trex’s Select line has a different look than Enhance or Transcend. Instead of the wood-streaking look, Select features a textured wood-grain look on the surface of the board, without the deeper grooves of Enhance or Transcend.
What thickness is composite decking?
Length: 4800mm, Width: 138mm, Thickness: 23mm. UltraShield Grey Composite Decking Boards. UltraShield Composite Decking can be installed for commercial and residential applications.
How much space do you need between composite deck boards?
One of the most critical steps for properly securing composite decking in place is to make sure you have a 1/4-inch to 3/16-inch gap between the decking boards (don’t exceed 1/2 inch). This space is important for two reasons.
Does Trex make 2x6?
Trex® Select 2×6 Lumber 2×6 composite boards to match Trex Select decking for railings and special applications. Shell covers top and sides (3 sides) 16′ length.
Article first time published on
How much does a 16 foot Trex board way?
The decking board of Trex weighs around 27-28 pounds.
What is a good composite decking?
- Fiberon. Fiberon is a brand that specializes in composite decking materials. …
- MoistureShield. MoistureShield has a great product that is definitely worthy of your attention. …
- Cali Bamboo. …
- Trex. …
- Duralife. …
- Lumberock. …
- Envision. …
- TimberTech (AZEK)
Can I use 1x6 for deck boards?
Width of material: We recommend only 1×4, 5/4×4 or narrower boards. Never use 1×6 or 5/4×6 material in close to ground applications. Spacing between boards: You must allow space for your deck boards to expand when they take on moisture, as they will inevitably do when exposed to wet weather, rain or high humidity.
Are wider deck boards better?
Narrower boards work best. 4” nominal (3-1/2” actual) wide deck boards perform better than wider (6” nominal) deck boards. Because there are more gaps between the deck boards, 4” nominal deck boards provide about 44% more top of deck ventilation than 6” nominal decking.
How much does a 20 x20 composite deck cost?
The average deck size is usually around 400 square feet. If we assume a 20′ x 20′ deck, then a rough estimate for pressure treated wood would be around $3,000, whereas the same deck built with a high-quality composite material might cost around $5,6001.
What are the disadvantages of composite decking?
- A pricey alternative to wood. Durability comes at a cost, as composite decking is more expensive than wood. …
- Composites aren’t natural. …
- Composite decks aren’t completely maintenance free. …
- You’ll need to comparison shop.
Are Trex decks worth it?
Composite decking is worth the money. It costs more upfront, but thanks to minimal maintenance costs and long life, the annual cost for the life of the fence is significantly cheaper for composite materials. If what you have in mind are the Trex decks of 15 years ago, you’d be surprised to see how far they’ve come.
What are the three grades of Trex?
Trex deck design comes in three types: Select, Enhance, and Transcend. You can’t go wrong with any type of decking from Trex, but we’ve created a chart to help you decide which type is best for your needs.
What is the difference between the different grades of Trex?
The Three Lines of Trex Composite Decking Trex offers three tiers of composite decking—Transcend, Enhance, and Select. These are considered “good,” “better,” and “best,” with Transcend being best, Enhance being better, and Select being good.
Is Trex Transcend capped on 4 sides?
The advantages the cellular PVC capped products have is the have less heat retention, no wood or organic materials, much lighter in weight. Trex Transcends is a capped composite (has wood filler) with the cap on 3 sides. … This product is capped on all 4 sides and does not have any wood content in it.
What is the width of composite deck boards?
How wide are composite deck boards? Deck boards from popular composite decking brands such as Trex, DuraLife, and Deckorators usually measure in at 5-1/2 inches wide.
How wide is TimberTech?
Featuring a distinct, wirebrushed, low-gloss texture, and six dynamic colors, TimberTech AZEK’s Vintage Collection now comes in three widths: narrow (3 1⁄2”), standard (5 1⁄2”) and wide (7 1⁄4”).
What is the widest decking board?
How wide are deck boards? The most common decking widths are 90mm to 150mm, with 120mm and 140mm in between. The width option you choose for your project can make a big impact in the ultimate effect, so get creative to achieve the best look for your decking while staying within your budget.
Why is my composite deck warping?
Warping occurs when the decking’s surface is exposed to sunlight. The decking becomes hot and starts to distort gradually. It happens during thermal expansion when the decking absorbs heat from the sun and expands. The heat from the sun causes the decking to be flexible.
How do you hide the ends of Trex decking?
Composite decking ends can be finished by picture framing, raised fascia board, painting the ends, attaching decking veneer, composite nosing strips, vinyl stair nosing cove, composite corner trim or plastic end caps.
What is a 5 4 deck board?
The most popular thickness for decking boards in North America is a 5/4 thickness which is an actual 1” thick. Use the table below to understand the most common board thicknesses: Decking Thickness Definition Table. Nominal Thickness.
What is a 5 4 inch board?
5/4 lumber is lumber that was rough sawn to 1 1/4 inch. When it is finished planed as you would get at a retail lumberyard, it will measure about 1″ though that can sometiimes vary upward.
Why is it called 5 4?
It simply refers to how many 1/4-inches thick the rough stock is. For example, 4/4 (read out loud as four-quarters) is 1-in. thick in the rough. 5/4 is 1-1/4-in.
Should I use 2x6 for decking?
2×6 joists should only be used on ground-level decks that do not require, and will not provide for, any guards. … Most decking is not strong enough to support longer spans than 16″. Some builders reduce joist spacing to 12″ on center to strengthen the deck frame or to increase maximum allowable joist spans.
What is the price of Trex decking?
Trex Decking Cost Trex decking costs $1,600 to $9,600, averaging about $4,800. That’s $5 to $12 per square foot for just decking boards and $5 to $15 per square foot for installation.
Is Trex decking slippery when wet?
Trex decking is a low-maintenance decking solution that requires a fraction of the work of wood decks and is less likely to get slippery when wet. It still requires occasional attention to keep it looking its best, but you’ll be delighted with the finished results.
