Hardibacker 500 inside showers will be taped with Alkali Resistant Mesh tape and thinset. Hardi outside of showers will be taped with ARM tape and joint compound (and textured with all purpose joint compound). –Hardi says not to use paper tape—alkali environment will destroy it. You must use ARM mesh tape.
Can you use drywall mesh tape for cement board?
Apply Mesh Tape Paper tape simply won’t hold up on cement board. Although paper tape generally leads to a cleaner finish on drywall, you can still achieve a smooth look if you use mesh tape on a drywall/cement board joint. Use this self-adhesive joint tape where cement board and drywall meet.
Should you tape cement board joints?
The thinset and mesh tape are to strengthen the seams. If you are going to tile over the cement board, you should tape the seams. This should not be that difficult.
Do you have to tape seams on Hardibacker?
For tile backer boards such as Durock, Wonderboard, Hardiebacker, Permabase, and others the seams between the board need to be treated with 2-inch alkali-resistant mesh tape.
What is mesh tape?
Mesh drywall tape has a tacky backing, allowing it to be self-stuck to the wall. Paper tape needs to be embedded in a layer of joint compound. This means that mesh tape is easier for the average person to install on a flat length of wall. Most paper tape also comes with a factory crease in the center.
What do you tape and mud cement board with?
Use special mesh tape on seams Cover all of the corners, joints and seams, including the joint where drywall and cement board meet, with the fiberglass mesh tape.
Do I really need thinset under backer board?
Using thinset under cement board is a commonly skipped step amongst many contractors. … However, many manufacturers including, both Durock and Hardiebacker not only recommend that you use thinset under their backerboard, but they specify it and will void the warranty on their product if it’s not used.
Can you use joint compound on Hardibacker?
HardieBacker 500 cement board is 0.42 inches thick, slightly less than true 1/2 inch thickness. When using drywall compound over cement board, it is recommended, but not required, to use a faster setting-type joint compound (45 or 90 min), than typical joint compound.
How do you tape joint between cement board and drywall?
Spread joint compound over the length of the tape with a 6-inch drywall knife. Make the seam just wide enough to cover the entire surface of the tape (generally 3 inches). Get it smooth and flat. Dab additional compound over the screw holes on both the drywall and cement boards, near the seam but not under the tape.
Can you tile straight onto Hardibacker?
The Hardibacker will be fine to tile straight onto.
Article first time published on
Do I need to waterproof Hardibacker board?
Hardiebacker (James Hardie): the use of a waterproof membrane, vapor barrier or vapor. retarding membrane is optional unless the local building code requires it.
Is thinset the same as mortar?
Thinset is an adhesive cement used to secure floor and wall tiles to concrete surfaces. The word “thinset” is sometimes used interchangeably with “mortar,” because it’s a type of modified mortar made specifically for tile.
Do you mud before mesh tape?
While it’s fairly simple to position mesh tape over a dry joint and then apply your first coat of mud on top, mesh tape is thicker than paper tape and can result in more noticeable joints when the wall is painted.
Can you use premixed joint compound with mesh tape?
The chemicals in it react to heat and then within minutes it will dry and harden. So if you read the instructions on the mesh tape, it will tell you recommended to be used in combination with quick set mud. The problem with using premixed mud with mesh tape is that the joint CAN crack later.
Can I just screw down cement board?
Screw and Joints Do not use drywall screws as they are not recommended to be used to hold the backer board in place. All of your backer board pieces should be cut before they are placed on the floor. … It is important to highlight that screws shall not be installed all the way down to the floor joists.
Do you have to use thinset under Hardibacker?
The installation manual for HardieBacker suggests to embed it in thin-set and it should be installed over plywood. Thus I would suggest removing the current wood planks flooring, install a 3/4″ outdoor grade plywood, thinset and then your HardieBacker (screwed down).
Does drywall mud stick to Hardibacker?
Originally sanded smooth it still looks perfect. wallyk said it best, the flex in the substrate, whatever that is, will rule over time. No flex, no problem. I used dry wall mud then latex paint on cement hardibacker behind my wood stove .
Can you tape and texture cement board?
Durock Cement Boards are a type of drywall reinforced with cement for a harder surface. This type of wall material can be finished just like ordinary drywall, using joint tape and joint compound.
Is tile adhesive better than thinset?
If installing a small area of ceramic floor or wall tiles, mastic is the better choice. The adhesive is premixed, does not require water and will hold the tiles in place with no beating or additives. If installing a large amount of tiles, stone tiles or glass tiles, thinset mortar should be used.
