ManufacturerTransmission TypeTransmission FluidCHEVROLET4L60EDEXRON IIIISUZU4L60EDEXRON IIIOLDSMOBILE4L60EDEXRON IIIPONTIAC4L60EDEXRON III
What transmission fluid should I use in a 4L60E?
Let’s look at the GM 4L60E automatic in a 2000 Camaro or Corvette. Dexron VI is often claimed as the proper fill yet Dexron VI didn’t appear until 2005, which means this transmission was originally a factory fill with Dexron III. This isn’t a huge problem since Dexron VI will certainly work.
How often should you change transmission fluid in a 4L60E?
For optimum protection, change the Transmission Fluid and filter every 30,000 miles (unless you have a new vehicle that is filled with Dexron III ATF, which is supposed to be good for 100,000 miles).
What transmission fluid does GM use?
DEXRON-VI Automatic Transmission Fluidis suitable for use in vehicles that specify the following requirements: fully licensed and approved by GM, recommended for use in GM transmissions model year 2006 and newer calling for DEXRON-VI Automatic Transmission Fluid (replaces DEXRON-III and DEXRON-II(E), or recommended …
Can I use DEXRON 6 instead of ATF 4?
MaxLife® ATF, ATF +4 and DEXRON® VI are all synthetic transmission fluids. Is it OK to mix synthetic ATF with a conventional and/or synthetic blend ATF? Yes. Synthetic ATF and conventional fluids are 100 percent compatible with each other.
What is Valvoline ATF?
Valvoline ATF is a full synthetic automatic transmission fluid for passenger cars and vans for use in new and high kilometer vehicles. Additoinal product benefits include: Superior protection – Optimum protection against wear and tear, also under high stress working conditions.
Can I mix DEXRON 3 and DEXRON 6?
DEXRON-VI can be used in any proportion in past model vehicles equipped with an automatic transmission, in place of DEXRON-III (for instance, topping off the fluid in the event of a repair or fluid change). DEXRON-VI is also compatible with any former version of DEXRON for use in automatic transmissions.
Can I use dexron IV instead of II?
ATF IV and Dexron II are different enough I’d suggest against using it, however all Dexron fluids are backwards compatible, so you could use Dexron III or Dexron VI. If you can get Dexron III you can mix it with the exiting Dexron II in your power steering reservoir without issue.
What transmission fluid does a 5.3 Vortec take?
The type of transmission fluid used by the chevy silverado is carquest dexron®-vi full synthetic atf.
Is dexron VI transmission fluid synthetic?
ACDelco DEXRON-VI Full Synthetic Automatic Transmission Fluid is the most recent release in the well-established DEXRON series of automotive transmission fluids. … ACDelco DEXRON-VI Full Synthetic Automatic Transmission Fluid helps automatic transmissions last longer and perform better.
Article first time published on
How many miles is a 4L60E good for?
4l60e from 1996 held up well. Reverse kinda was finicky, every now and than it would slip but had a good life. I honestly think around 250-300k it should be rebuilt if its original.
Is it bad to change transmission fluid on high mileage?
Changing the transmission fluid on a high-mileage car is risky. Don’t do it unless your transmission is running fine and the fluid is first-rate, because it can make transmission failure imminent.
Is it better to flush or change transmission fluid?
A transmission fluid change will help to restore your system to good working order and is the cheaper option. It is also a relatively simple task that can be undertaken by vehicle owners. A transmission fluid flush is more costly, but will replace all of the fluid and any contaminants that have built up in the system.
Can you mix transmission fluid with power steering fluid?
No, you can not mix power steering fluid with transmission fluid. Transmission fluid is not made for the same purposes as power steering fluid, so you can’t mix the two without risking your power steering pump and your transmission.
What's the difference between ATF and dexron?
DEXRON is the trade name for a group of technical specifications of automatic transmission fluid (ATF) created by General Motors (GM). … Originally the DEXRON name was associated exclusively with automatic transmission fluids, later GM released DEXRON gear oils and other lubricants under the DEXRON brand.
Is ATF 4 the same as dexron 3?
ATF+4 has specific additives designed for specific Chrysler transmissions. The additives and the make up of the fluid keeps the transmission working properly. If you put the wrong fluid in at best it won’t shift right, at worst it will ruin the transmission. Dexron is the same thing only for Chevy vehicles.
Do they still make DEXRON 3?
Direct Replacement. Dexron VI fully replaces Dexron III and prior evolutions of the Dexron fluids. GM manufactured the liquid for compatibility with transmissions requiring earlier versions of the fluid. Dexron VI works in any vehicle that requires ATF-A (the original automatic transmission fluid) or a Dexron variation …
Can you use DEXRON VI in Allison Transmission?
deXRon®-Vi shall not be used in allison 500, 600 or 700 series transmissions (at, mt, ht, ht/V/Clt products). … C4 fluids are no longer recommended in any commercial on-highway transmissions. a complete list of approved fluids can be found at click service, then Fluids.
Can you mix transmission fluid with hydraulic fluid?
Transmission fluid and hydraulic fluid are both petrochemicals. They’ll mix and you’ll have a whole other fluid that will have different properties from the original two. It could be beneficial or deleterious depending on the mixture.
Can I use Multi Vehicle ATF?
It is formulated with all synthetic base stocks and a proprietary additive system to ensure optimal transmission performance in a wide variety of vehicles. Valvoline Import Multi-Vehicle ATF can also be used in many domestic vehicles. It meets requirements of General Motors and Ford vehicles.
What transmission fluid do I need?
The easiest way to make sure you’re using the right type of ATF is to check the owner’s manual. It’ll tell you exactly which ATF the manufacturer recommended for your car. You may also find a recommendation on the dipstick. Either is a reasonable resource for determining the right type of fluid for your transmission.
What color is atf4?
FLUID COLOR Mopar ATF+4 has exceptional durability. However, the red dye used in ATF+4 is not permanent; as the fluid ages, it may become darker or appear brown in color. ATF+4 also has a unique odor that may change with age.
Can you add transmission fluid through dipstick?
Observe markings at end of dipstick. Your dipstick might have two markings for “full”—one warm, one cold. If the automatic transmission fluid level does not come up to the “warm” line, you’ll need to add automatic transmission fluid. Insert long funnel into automatic transmission fluid dipstick hole.
How many quarts of transmission fluid does a 1997 Chevy Silverado take?
Notes:This specification has been updated from Dexron II or III to Dexron VI per a Technical Service Bulletin from the manufacturerCapacity:4 speed 4L60-E Total Fill 11.2 quarts 5 quarts Initial Fill
What is dexron III?
ATF Dexron-III is a premium automatic transmission fluid specially formulated to meet the needs of today’s more compact transmissions, running at higher operating temperatures and with electronic control.
What kind of transmission fluid does a 4R70W take?
The 4R70W and many other Ford transmissions require MERCON V automatic transmission fluid.
Can you use dexron III in place of dexron II?
Dexron III supersedes Dexron II. Meaning, it replaced it. Anywhere Dex II is called for, Dex III can be used.
Can you use dexron VI instead of dexron II?
Valvoline DEXRON™-VI ATF is an automatic transmission fluid that can be used in new and old GM transmissions, is fully backward serviceable, and can be used wherever DEXRON™-II and/or DEXRON™-III are recommended.
What replaces dexron II transmission fluid?
Dexron VI replaced Dexron II and III, and can be used in General Motors domestically built or import transmissions that specified Dexron II or Dexron III. Dexron VI is a low viscosity transmission fluid and should also be used with the full synthetic low viscosity transmission fluid.
Is Mercon LV the same as dexron VI?
KLONDIKE DEXRON®-VI / MERCON® LV Full Synthetic Automatic Transmission Fluid is an OEM approved fluid registered with General Motors for DEXRON®-VI and Ford Motor Company for MERCON® LV. … This specification is fully backwards compatible and replaces all previous generation DEXRON fluids.
Is Mercon LV synthetic?
Dexron® VI/Mercon® LV Automatic Transmission Fluid is a premium quality, fully synthetic, multi-vehicle, low viscosity automatic transmission fluid that is recommended for use in those General Motors and Ford vehicles that specify the use of Dexron® VI and Mercon® LV fluids respectively.
