Possible causes for a Paslode nail gun not firing are: A nail jam is stopping the nails from moving forward. The gas fuel cell is empty, out-of-date or not attached properly. The wrong type of Paslode nails are being used.
How often should you clean Paslode nail gun?
Paslode recommend that you clean and lubricate your nailer every 50,000 shots. If it’s being used in a dirty environment or at high nailing rates for extended periods of time then this should be more often. Cleaning your nail gun is easy and shouldn’t take any longer than 15 minutes.
Why is my Paslode gun flashing green?
This is the battery indicator light. When you insert a fully-charged battery into the tool, you will see a blinking green light. If the indicator light blinks red, recharge the battery. !
How often should I oil my nail gun?
Pneumatic Tools To break down deposits and ensure smooth starts and stops, most pneumatic nailers and staplers require a total of 4-5 drops of pneumatic tool oil into the air fitting every day, adjusting for the amount of use.
How do you fix a nail gun that won't fire?
- Clear Jams. …
- Inspect Your Air Supply. …
- Reload the Magazine. …
- Clean the Tool. …
- Replace Seals and O-Rings. …
- Inspect for Damage. …
- Take It to the Service Center.
How do you clean a nail gun?
- Step 1: Remove Handle from Magazine and Clean Grill and Air Filter.
- Step 2: Degrease the Cylinder Head.
- Step 3: Lubricate Seal Rings.
- Step 4: Clean the Motor Assembly.
- Step 5: Oil the Motor Assembly.
- Step 6: Reassemble.
Why is my Paslode charger flashing red and green?
If battery is completely discharged, the red and green lights may flash back and forth for up to 20 minutes. This safety feature slowly recharges the battery until it is ready to accept the full charging current. If the red and green light continue to flash after 20 minutes, replace the battery.
Can I use WD40 on my nail gun?
A universal rule for protecting and prolonging the life of a pneumatic nailer, make sure to regularly oil your tool. … Never use WD40, motor oil, transmission fluid or aerosol lubricants.
How long is paslode warranty?
all moulded nylon components on Paslode Impulse tools will be free from manufacturing defects in workmanship and materials for a period of 5 years from the date of purchase of the relevant product.
Can I use 3in1 oil in my nail gun?
A light weight non-detergent oil works well. If it has silicone in it , any exhaust may mess with coatings in the future, so stay away from that with items used in the wood shop. 3 in 1 works fine. Marvel works fine.
Article first time published on
How many nails are in a paslode strip?
When you buy a fastener pack they contain 2500 nails and, yes, they give two fuel cells with it. The nails are paper-collated and at an angle (34˚), and come in three different coatings/finishes: bright, hot dip galvanised, and mechanically galvanised – all with diamond points.
Why is my nail gun just shooting air?
If you try to fire a pneumatic nail gun or stapler, but only hear air leaking when engaging the trigger, it’s likely that your tool’s “O-Ring” is not sealing properly. … Simply stretch the “O-Ring” on the firing valve and apply grease. This should take care of the issue – helping your air tool run properly.
Do Brad Nailers need oil?
Traditional Oiled Nail Guns Oiled nailers require regular lubrication to ensure they function properly. Adding a few drops of oil into the air inlet each time you use the tool reduces heat and friction and prevents valves, seals and O-rings from wearing out. … Consult the tool’s manual for instructions.
What degree are Paslode finish nails?
Paslode, Finishing Nail, 650047, 20 Degree Angled Galvanized, 16 Gauge, 2,000 per Box, 2 inch – Brad Nails – Amazon.com.
How fast does a Paslode nail gun shoot?
ModelCF325XPHeight14.5″Length12″Width4″Speed2-3 nails per second
How long does paslode gas last?
Part #816008Quantity1 PackSize1.32 oz.ColorOrangeMax. Shelf life27 Months
How do I know if my Paslode battery is bad?
If the battery is damaged, the red indicator light on charger does not flash when you try to charge the battery. If the battery isn’t accepting a charge when you mount it on the charger, you must replace it. A new battery doesn’t come fully charged, so charge it before inserting it into the Paslode.
How do you unjam a Paslode finish nailer?
- Unscrew the two front nose bolts, or lift the nose latch, releasing the front nose plate.
- Open the nose.
- Clear the jam and push the driver blade back to its rest position.
- Close the front nose and refix it.
- Ensure the work contact element is free.
- Reinsert the battery and the fuel cell.
Why is my nail gun not shooting nails all the way?
If your nailer isn’t sinking nails deep enough, check the driver, o-ring, seal, bumper, springs, oil, trigger valve, and piston ring. Review our troubleshooting guide for tips on how you can fix your nailer yourself. … Inspect the seal for wear and damage. Replace the seal if necessary.
Will a nail gun fire without nails?
Nail compatibility Insure that the nails are compatible with the gun. If they’re not, the gun may not fire, misfire, or self destruct. If it is making a “big” dent then it usually means that your nails are jammed.
What is an impulse battery?
Impulse Lithiums Standard Series LiFeP04 Lithium Batteries are a drop in replacement for Lead Acid/AGM Batteries. The Standard Series is a more affordable battery without Bluetooth Monitoring yet offer performance fear superior to any Lead Acid/AGM battery on the market today.
Why is my battery tender flashing red and green?
If you connected the battery wrong, it will blink red then green alternating colors. This red-green blinking means you hooked up the battery “polarity” wrong.
How long does it take to charge a Paslode battery?
This Paslode Lithium Battery Cell is a great power tool accessory. It takes 90 minutes to fully charge. It can be used with a Paslode Framing Nailer, Paslode Gas Brad Nailer, Paslode Impulse Angled Nailer and a Paslode Gas Posit Placement Nailer.
